添加whatshub工单

_php_code/AbstractScrmSpider.class.php

@@ -107,6 +107,11 @@ abstract class AbstractScrmSpider
         if ($detailApi) { $apiUrlsToIntercept[] = $detailApi; }
         if ($countApi)  { $apiUrlsToIntercept[] = $countApi; }
 // var_dump($apiUrlsToIntercept);
+// dump([
+//             'pageUrl'     => $config['pageUrl'],
+//             'apiUrls'     => $apiUrlsToIntercept,
+//             'authActions' => $config['authActions']
+//         ]);
         // 【阶段一】：初始化并首屏拦截
         $initResult = $this->requestNode('/api/auth-and-intercept', [
             'pageUrl'     => $config['pageUrl'],
@@ -120,7 +125,8 @@ abstract class AbstractScrmSpider
 
         $interceptedApis = $initResult['interceptedApis'];
         $cookies         = $initResult['cookies'];
-// dd($interceptedApis);
+        $finalPageUrl    = $initResult['finalPageUrl'] ?? $config['pageUrl'];
+
         // 必须拦截到 List 接口，否则无法继续
         if (!isset($interceptedApis[$listApi])) {
             throw new Exception("致命错误：未能拦截到必须的列表接口 [{$listApi}]");
@@ -133,7 +139,7 @@ abstract class AbstractScrmSpider
 // dd($countData);
         $listApiNode = $interceptedApis[$listApi];
         $allListPagesData = [$listApiNode['data']]; // 初始化列表容器，装入第一页数据
-        
+        // dd($allListPagesData);exit;
         $totalPages = $this->extractListTotalPages($listApiNode['data'], $countData);
         
         $mode = $config['paginationMode'] ?? self::MODE_FETCH;
@@ -163,7 +169,7 @@ abstract class AbstractScrmSpider
                         if ($pResult['success']) $allListPagesData[] = $pResult['data'];
                     }
                 }
-            } 
+            }
             // 策略 2：强制 UI 点击
             elseif ($mode === self::MODE_UI) {
                 $uiConfig = $this->getUiPaginationConfig();
@@ -176,6 +182,7 @@ abstract class AbstractScrmSpider
                 $uiResult = $this->requestNode('/api/ui-pagination', [
                     'apiUrl'          => $listApi,
                     'pageUrl'         => $config['pageUrl'],
+                    'finalPageUrl'    => $finalPageUrl,
                     'nextBtnSelector' => $uiConfig['nextBtnSelector'],
                     'waitMs'          => $uiConfig['waitMs'] ?? 2000,
                     'clicksToPerform' => $clicksToPerform,

_php_code/Chatknow.php

@@ -0,0 +1,99 @@
+<?php
+// Chatknow SCRM工单
+require_once __DIR__ . '/AbstractScrmSpider.class.php';
+
+class Chatknow extends AbstractScrmSpider
+{
+    const API_LIST  = '/user/user/UserInfoChildChannel/list';         // 列表API地址
+    const API_DETAILS = '';                                         // 详情API地址
+    const API_COUNT = '';                                           // 总数API地址
+    const DEFAULT_PER_PAGE_COUNT = 10;                              // List默认每页显示的数量
+    private $pageUrl;
+    private $account;
+    private $password;
+    private $unifiedData;
+    
+    // 实例化时动态传入账号和密码
+    public function __construct($pageUrl, $account, $password, $nodeHost = 'http://127.0.0.1:3001')
+    {
+        parent::__construct($nodeHost);
+        $this->account = $account;
+        $this->password = $password;
+        $this->pageUrl = $pageUrl;
+        
+        $this->unifiedData = new UnifiedScrmData();
+    }
+
+    protected function getSpiderConfig()
+    {
+        return [
+            'pageUrl' => $this->pageUrl,
+            'apiUrls' => [self::API_LIST],
+            'listApi'   => self::API_LIST,                  // 必须,第一页的列表数据
+            // 'detailApi' => self::API_DETAILS,               // 选填
+            // 'countApi'  => self::API_COUNT,
+            
+            'listMethod' => 'GET',
+            
+            'paginationMode' => self::MODE_UI,
+            
+            'authActions' => [
+                // ['type' => 'vue_select', 'selector' => 'input[type="password"]', 'value' => $this->password],
+                // ['type' => 'type', 'selector' => '#username_input', 'value' => $this->account],
+                // ['type' => 'vue_click', 'selector' => '.layui-btn', 'text' => '搜索'],
+                
+                ['type' => 'wait', 'ms' => 4000]
+            ]
+        ];
+    }
+
+    // 只负责解析 List 的总页数
+    protected function extractListTotalPages($listFirstPageData, $countData = null)
+    {
+        $default_per_page_count = self::DEFAULT_PER_PAGE_COUNT;
+        $this->unifiedData->total = $listFirstPageData['total'];
+        $this->unifiedData->todayNewCount = $listFirstPageData['data']['today_num'];
+        
+        if($listFirstPageData['total'] <= $default_per_page_count) {
+            return 1;
+        }
+        
+        return ceil($listFirstPageData['total']/$default_per_page_count);
+    }
+
+    // 只负责组装 List 的翻页参数
+    protected function buildListPageParams($page)
+    {
+        return ['page' => $page, 'limit' => self::DEFAULT_PER_PAGE_COUNT];
+    }
+
+    // 提供 List 的下一页按钮信息
+    protected function getUiPaginationConfig()
+    {
+        return [
+            'nextBtnSelector' => '.tabs-content .arco-pagination-item-next', 
+            'waitMs'          => 2000
+        ];
+    }
+
+    // 清爽至极的数据清洗：详情是详情，列表是列表
+    protected function parseToUnifiedData($detailData, $allListPagesData)
+    {
+        $unifiedData = $this->unifiedData;
+        
+        // 循环合并了所有页数的 List 数组
+        foreach ($allListPagesData as $pageRaw) {
+            $records = $pageRaw['rows'] ?? [];
+            foreach ($records as $item) {
+                if(!empty($item['username'])) {
+                    $number = $item['username'] ?? null;
+                    $isOnline = (isset($item['state']) && $item['state'] == 1);
+                    
+                    $unifiedData->addNumber($number, $isOnline, $item['today_num']);
+                }
+            }
+        }
+
+        return $unifiedData;
+    }
+}

_php_code/Whatshub.php

@@ -0,0 +1,124 @@
+<?php
+// Whatshub 工单平台
+
+require_once __DIR__ . '/AbstractScrmSpider.class.php';
+
+class Whatshub extends AbstractScrmSpider
+{
+    const API_LIST  = '/api/whatshub-counter/workShare/open/detail';    // 列表API地址
+    const API_DETAILS = '/api/whatshub-counter/workShare/open/statistics';       // 详情API地址
+    const API_COUNT = '';                                       // 总数API地址
+    const DEFAULT_PER_PAGE_COUNT = 20;                          // List默认每页显示的数量
+    private $pageUrl;
+    private $account;
+    private $password;
+    private $unifiedData;
+    
+    // 实例化时动态传入账号和密码
+    public function __construct($pageUrl, $account, $password, $nodeHost = 'http://127.0.0.1:3001')
+    {
+        parent::__construct($nodeHost);
+        $this->account = $account;
+        $this->password = $password;
+        $this->pageUrl = $pageUrl;
+        
+        $this->unifiedData = new UnifiedScrmData();
+    }
+
+    protected function getSpiderConfig()
+    {
+        $host = (string) parse_url($this->pageUrl, PHP_URL_HOST);
+        return [
+            'pageUrl' => $this->pageUrl,
+            'apiUrls' => [self::API_LIST, self::API_DETAILS],
+            
+            // 明确指派角色
+            'listApi'   => self::API_LIST,                  // 必须
+            
+            'listMethod' => 'POST',
+            'paginationMode' => self::MODE_UI,
+            
+            'authActions' => [
+                // 1. 填入密码：寻找 class 包含 el-message-box__input 下面的任意 input
+                // Node.js 会自动扫描所有匹配项，并只把密码强行注入到那个“肉眼可见”的框里
+                ['type' => 'vue_fill', 'selector' => '.el-input__inner', 'value' => $this->password],
+                
+                // 2. 停顿 500ms，让 Vue 绑定的 v-model 彻底反应过来
+                ['type' => 'wait', 'ms' => 500],
+                
+                // 3. 点击确认：寻找 MessageBox 底部的蓝色 primary 确认按钮
+                // 同样利用 vue_click 的可见性过滤，无视隐藏的旧弹窗按钮
+                ['type' => 'vue_click', 'selector' => '.vxe-button-group .theme--primary'],
+                
+                // 4. 等待弹窗淡出，接口开始请求
+                ['type' => 'wait', 'ms' => 2200]
+            ],
+            // Whatshub 专用：Real Browser + Turnstile + Captcha API 兜底 + 会话复用
+            'antiBot'        => [
+                'enabled'            => true,
+                'profile'            => 'real',
+                'turnstile'          => true,
+                'solverFallback'     => true,
+                'sessionKey'         => 'whatshub:' . $host,
+                'challengeTimeoutMs' => 60000,
+            ],
+        ];
+    }
+
+    // 只负责解析 List 的总页数
+    protected function extractListTotalPages($listFirstPageData, $countData = null)
+    {
+        $default_per_page_count = self::DEFAULT_PER_PAGE_COUNT;
+        $this->unifiedData->total = $listFirstPageData['data']['total'];
+        
+        if($this->unifiedData->total <= $default_per_page_count) {
+            return 1;
+        }
+        
+        return ceil($this->unifiedData->total/$default_per_page_count);
+    }
+
+    // 没有分页返回空数组
+    protected function buildListPageParams($page)
+    {
+        return ['pageNum' => $page, 'pageSize' => self::DEFAULT_PER_PAGE_COUNT];
+    }
+
+    // 提供 List 的下一页按钮信息
+    protected function getUiPaginationConfig()
+    {
+        return [
+            'nextBtnSelector' => '.vxe-pager--next-btn', 
+            'waitMs'          => 1500
+        ];
+    }
+
+    // 清爽至极的数据清洗：详情是详情，列表是列表
+    protected function parseToUnifiedData($detailData, $allListPagesData)
+    {
+        $unifiedData = $this->unifiedData;
+        
+        // 1. 如果捕获到了详情数据，提取今日新增
+        if ($detailData) {
+            $unifiedData->todayNewCount = (int)($detailData['data']['dayNewFans'] ?? 0);
+        }
+
+        // 2. 循环合并了所有页数的 List 数组
+        foreach ($allListPagesData as $pageRaw) {
+            $records = $pageRaw['data']['rows'] ?? []; 
+            foreach ($records as $item) {
+                if(!empty($item['account'])) {
+                    $number = $item['account'] ?? null;
+                    $isOnline = (isset($item['isOnline']) && $item['isOnline'] == 1);
+                    
+                    $unifiedData->addNumber($number, $isOnline, $item['dayNewFans']);
+                }
+            }
+        }
+        
+        // 🚀 3. 终极统计：所有翻页数据均已入库，此时再统计真实的 Total 总数
+        $unifiedData->total = count($unifiedData->numbers);
+
+        return $unifiedData;
+    }
+}

_php_code/Xinghe.php

@@ -5,10 +5,10 @@ require_once __DIR__ . '/AbstractScrmSpider.class.php';
 
 class Xinghe extends AbstractScrmSpider
 {
-    const API_LIST  = '/share/share/api_yinliu_count.html';    // 列表API地址
+    const API_LIST  = '/share/share/api_yinliu_count.html';         // 列表API地址
-    const API_DETAILS = '';                                       // 详情API地址
+    const API_DETAILS = '';                                         // 详情API地址
-    const API_COUNT = '';                                       // 总数API地址
+    const API_COUNT = '';                                           // 总数API地址
-    const DEFAULT_PER_PAGE_COUNT = 10;                          // List默认每页显示的数量
+    const DEFAULT_PER_PAGE_COUNT = 10;                              // List默认每页显示的数量
     private $pageUrl;
     private $account;
     private $password;
@@ -29,7 +29,7 @@ class Xinghe extends AbstractScrmSpider
     {
         return [
             'pageUrl' => $this->pageUrl,
-            'apiUrls' => [self::API_LIST . "?page=1&limit=10"],
+            'apiUrls' => [self::API_LIST . "?page=1&limit=10&is_repet=1"],
             'listApi'   => self::API_LIST,                  // 必须,第一页的列表数据
             // 'detailApi' => self::API_DETAILS,               // 选填
             // 'countApi'  => self::API_COUNT,
@@ -39,9 +39,9 @@ class Xinghe extends AbstractScrmSpider
             'paginationMode' => self::MODE_FETCH,
             
             'authActions' => [
-                // ['type' => 'type', 'selector' => 'input[type="password"]', 'value' => $this->password],
+                // ['type' => 'vue_select', 'selector' => 'input[type="password"]', 'value' => $this->password],
                 // ['type' => 'type', 'selector' => '#username_input', 'value' => $this->account],
-                // ['type' => 'press', 'key' => 'Enter'],
+                // ['type' => 'vue_click', 'selector' => '.layui-btn', 'text' => '搜索'],
                 
                 ['type' => 'wait', 'ms' => 2000]
             ]
@@ -53,7 +53,7 @@ class Xinghe extends AbstractScrmSpider
     {
         $default_per_page_count = self::DEFAULT_PER_PAGE_COUNT;
         $this->unifiedData->total = $listFirstPageData['count'];
-        $this->unifiedData->todayNewCount = $listFirstPageData['totalRow']['day_sum'];
+        // $this->unifiedData->todayNewCount = $listFirstPageData['totalRow']['day_sum'];
         
         if($listFirstPageData['count'] <= $default_per_page_count) {
             return 1;
@@ -84,7 +84,7 @@ class Xinghe extends AbstractScrmSpider
 
         // 循环合并了所有页数的 List 数组
         foreach ($allListPagesData as $pageRaw) {
-            $records = $pageRaw['data'] ?? []; 
+            $records = $pageRaw['data'] ?? [];
             foreach ($records as $item) {
                 if(!empty($item['user'])) {
                     $number = $item['user'] ?? null;

_php_code/Xinghe2.php

@@ -0,0 +1,176 @@
+<?php
+require_once __DIR__ . '/UnifiedScrmData.class.php';
+
+/**
+ * 数据爬虫类
+ * 用于处理需要先获取 Token 授权，再读取接口数据的场景
+ */
+class Xinghe
+{
+    private $cookieFile;
+    private $ch;                // cURL 句柄
+    private $pageUrl;
+    private $account;
+    private $password;
+    private $unifiedData;
+    private $baseUrl;
+
+    /**
+     * 构造函数：初始化 cURL 和 Cookie 文件
+     */
+    public function __construct($pageUrl, $username, $password)
+    {
+        $this->pageUrl = $pageUrl;
+        $this->username = $username;
+        $this->password = $password;
+
+        $parsedUrl = parse_url($pageUrl);
+        $scheme = isset($parsedUrl['scheme']) ? $parsedUrl['scheme'] . '://' : '';
+        $host = isset($parsedUrl['host']) ? $parsedUrl['host'] : '';
+        $baseUrl = $scheme . $host;
+        $this->baseUrl = $baseUrl;
+
+        $this->unifiedData = new UnifiedScrmData();
+    }
+
+    public function run()
+    {
+        // 1. 创建临时 Cookie 文件
+        $this->cookieFile = tempnam(sys_get_temp_dir(), 'spider_cookie_');
+        if ($this->cookieFile === false) {
+            throw new \RuntimeException("无法在系统临时目录创建 Cookie 文件");
+        }
+
+        // 2. 初始化 cURL 并设置全局参数
+        $this->ch = curl_init();
+        
+        $apiUrl = '/share/share/api_yinliu_count.html?page=1&limit=10&id=&class_id=&is_repet=1&start_time=&end_time=';
+
+        $defaultOptions = [
+            CURLOPT_RETURNTRANSFER => true,         // 将结果返回为字符串
+            CURLOPT_HEADER         => false,        // 不输出响应头
+            CURLOPT_TIMEOUT        => 15,           // 设置超时时间（秒）
+            CURLOPT_USERAGENT      => 'Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/114.0.0.0 Safari/537.36',
+            // 核心优化：同时指定读写 Cookie 为同一个文件，cURL 会自动维护会话
+            CURLOPT_COOKIEJAR      => $this->cookieFile, 
+            CURLOPT_COOKIEFILE     => $this->cookieFile,
+        ];
+        
+        curl_setopt_array($this->ch, $defaultOptions);
+
+        $this->authenticate();
+        $first_page_data = $this->fetchApiData($apiUrl);            // 首页数据
+        $this->unifiedData->total = $first_page_data['count'];      // 总在线人数
+        $this->unifiedData->todayNewCount = $first_page_data['totalRow']['day_sum']; // 今日新增在线人数
+        
+        $total_pages = ceil($this->unifiedData->total/10);          // 总页数
+        $allListPagesData = [$first_page_data['data']];             // 初始化列表容器，装入第一页数据
+        for ($page = 2; $page <= $total_pages; $page++) {
+            $apiUrl = '/share/share/api_yinliu_count.html?page=' . $page . '&limit=10&id=&class_id=&is_repet=1&start_time=&end_time=';
+            
+            $page_data = $this->fetchApiData($apiUrl);
+            
+            $allListPagesData[] = $page_data['data'];
+        }
+
+        return $this->parseToUnifiedData($first_page_data, $allListPagesData);
+    }
+
+    // 清爽至极的数据清洗：详情是详情，列表是列表
+    protected function parseToUnifiedData($detailData, $allListPagesData)
+    {
+        $unifiedData = $this->unifiedData;
+
+        // 循环合并了所有页数的 List 数组
+        foreach ($allListPagesData as $records) {
+            foreach ($records as $item) {
+                if(!empty($item['user'])) {
+                    $number = $item['user'] ?? null;
+                    $isOnline = (isset($item['online']) && $item['online'] == 1);
+                    
+                    $unifiedData->addNumber($number, $isOnline, $item['day_sum']);
+                }
+            }
+        }
+
+        return $unifiedData;
+    }
+
+    /**
+     * 析构函数：释放资源，清理垃圾
+     */
+    public function __destruct()
+    {
+        // 关闭 cURL 会话
+        if (is_resource($this->ch) || $this->ch instanceof \CurlHandle) {
+            curl_close($this->ch);
+        }
+
+        // 删除临时 Cookie 文件
+        if (file_exists($this->cookieFile)) {
+            unlink($this->cookieFile);
+        }
+    }
+
+    /**
+     * 第一步：访问授权页面，建立会话
+     *
+     * @param string $authUrl 包含 token 的授权地址
+     * @return bool 授权请求是否成功
+     * @throws \Exception
+     */
+    public function authenticate()
+    {
+        $this->sendRequest($this->pageUrl);
+        return true; // 如果没有抛出异常，则认为请求成功
+    }
+
+    /**
+     * 第二步：请求 API 接口获取数据
+     *
+     * @param string $apiUrl 接口数据地址
+     * @return array|null 解析后的数组数据，如果解析失败返回 null
+     * @throws \Exception
+     */
+    public function fetchApiData($apiUrl)
+    {
+        $response = $this->sendRequest($this->baseUrl . $apiUrl);
+        
+        // 尝试解析 JSON 数据
+        $data = json_decode($response, true);
+        
+        if (json_last_error() !== JSON_ERROR_NONE) {
+            throw new \RuntimeException("JSON 解析失败: " . json_last_error_msg() . "。原始响应: " . $response);
+        }
+
+        return $data;
+    }
+
+    /**
+     * 发送 cURL 请求的底层私有方法
+     *
+     * @param string $url 目标地址
+     * @return string 服务器响应内容
+     * @throws \Exception
+     */
+    private function sendRequest($url)
+    {
+        curl_setopt($this->ch, CURLOPT_URL, $url);
+        
+        $response = curl_exec($this->ch);
+
+        // 检查是否有网络或 cURL 底层错误
+        if ($response === false) {
+            $error = curl_error($this->ch);
+            throw new \RuntimeException("请求失败 [{$url}]: {$error}");
+        }
+
+        // 检查 HTTP 状态码
+        $httpCode = curl_getinfo($this->ch, CURLINFO_HTTP_CODE);
+        if ($httpCode >= 400) {
+            throw new \RuntimeException("HTTP 请求异常 [{$url}]，状态码: {$httpCode}");
+        }
+        
+        return (string)$response;
+    }
+}

_php_code/index.php

@@ -1,15 +1,86 @@
 <?php
-// 文件名: run.php
+error_reporting(E_ALL);
+ini_set('display_errors', 'ON');
 
-require_once __DIR__ . '/A2c.php';      // A2c云控
+// 文件名: run.php
-require_once __DIR__ . '/Xinghe.php';      // 星河云控
+require_once __DIR__ . '/Chatknow.php';      // ChatKnow SCRM
+require_once __DIR__ . '/A2c.php';          // A2c云控
+require_once __DIR__ . '/Xinghe2.php';      // 星河云控
 require_once __DIR__ . '/Huojian.php';      // 火箭
-require_once __DIR__ . '/SsCustomer.php';      // SS云控(Customer)
+require_once __DIR__ . '/SsCustomer.php';   // SS云控(Customer)
 require_once __DIR__ . '/Haiwang.php';      // 海王
+require_once __DIR__ . '/Whatshub.php';    // Whatshub 工单平台
+
+try {
+    /*
+    命令行可以测试Cloudflare防火墙
+    curl -s -X POST http://127.0.0.1:3001/api/auth-and-intercept \
+      -H 'Content-Type: application/json' \
+      -d '{
+        "pageUrl": "https://web.whatshub.cc/m/iTYsWKQH5030/1",
+        "apiUrls": ["/api/whatshub-counter/workShare/open/detail"],
+        "authActions": [
+                    {"type": "vue_fill", "selector": ".el-input__inner", "value": "745030"},
+                    {"type": "wait", "ms": 500},
+                    {"type": "vue_click", "selector": ".vxe-button-group .theme--primary"},
+                    {"type": "wait", "ms": 2200}
+                ],
+        "antiBot": {
+          "enabled": true,
+          "profile": "real",
+          "turnstile": true,
+          "solverFallback": true,
+          "sessionKey": "whatshub:t.flowerbells.top",
+          "challengeTimeoutMs": 60000
+        }
+      }' | jq .
+    */
+    
+    echo "🚀 开始执行<Whatshub 工单平台>抓取任务 (多引擎智能调度)...\n\r";
+    $pageUrl = 'https://web.whatshub.cc/m/iTYsWKQH5030/1';     // PageUrl 入口授权页
+    $username = "";     // 登录账号
+    $password = "745030";     // 登录密码
+    $spider = new Whatshub($pageUrl, $username, $password);
+    $finalData = $spider->run();
+
+    echo "✅ 任务完成！统一数据如下：\n\r";
+    echo "----------------------------------------\n\r";
+    echo "当日新增：{$finalData->todayNewCount} 人\n\r";
+    echo "在线号码：{$finalData->totalOnline} 个\n\r";
+    echo "离线号码：{$finalData->totalOffline} 个\n\r";
+    echo "Total：" . $finalData->total . " 个号码\n\r";
+    echo "实际总共抓取：" . count($finalData->numbers) . " 个号码\n\r";
+    echo "号码列表：\n\r";
+    echo dd($finalData->numbers);
+} catch (Exception $e) {
+    echo "🚨 抓取异常：" . $e->getMessage() . "\n\r";
+}
+
+
+// try {
+//     echo "🚀 开始执行<ChatKnow SCRM>抓取任务 (多引擎智能调度)...\n\r";
+//     $pageUrl = 'https://user.chatknow.com/child/workorder-share?shareKey=jf5t6MNrJ2mC76N';     // PageUrl 入口授权页
+//     $username = "";     // 登录账号
+//     $password = "";     // 登录密码
+//     $spider = new Chatknow($pageUrl, $username, $password);
+//     $finalData = $spider->run();
+
+//     echo "✅ 任务完成！统一数据如下：\n\r";
+//     echo "----------------------------------------\n\r";
+//     echo "当日新增：{$finalData->todayNewCount} 人\n\r";
+//     echo "在线号码：{$finalData->totalOnline} 个\n\r";
+//     echo "离线号码：{$finalData->totalOffline} 个\n\r";
+//     echo "Total：" . $finalData->total . " 个号码\n\r";
+//     echo "实际总共抓取：" . count($finalData->numbers) . " 个号码\n\r";
+//     echo "号码列表：\n\r";
+//     echo dd($finalData->numbers);
+// } catch (Exception $e) {
+//     echo "🚨 抓取异常：" . $e->getMessage() . "\n\r";
+// }
 
 // try {
 //     echo "🚀 开始执行<A2c云控>抓取任务 (多引擎智能调度)...\n\r";
-//     $pageUrl = 'https://user.a2c.chat/visitors/counter/share?id=33e449dc83c24ee59275bf03a2d82234';     // PageUrl 入口授权页
+//     $pageUrl = 'https://yyk.ink/8415O53';     // PageUrl 入口授权页
 //     $username = "";     // 登录账号
 //     $password = "";     // 登录密码
 //     $spider = new A2c($pageUrl, $username, $password);
@@ -31,7 +102,7 @@ require_once __DIR__ . '/Haiwang.php';      // 海王
 
 // try {
 //     echo "🚀 开始执行<星河云控>抓取任务 (多引擎智能调度)...\n\r";
-//     $pageUrl = 'http://103.251.112.35:10158/share/share/index.html?token=pds65jl202t2kjis5firb8epu4d8a83ptfhc63d89l3mv11nwa';     // PageUrl 入口授权页
+//     $pageUrl = 'http://8.218.14.51/share/share/index.html?token=hn6z3egq4nnnebkv4063pcdouzr4ug5js902mlqo2n3yp9gzhe';     // PageUrl 入口授权页
 //     $username = "";     // 登录账号
 //     $password = "";     // 登录密码
 //     $spider = new Xinghe($pageUrl, $username, $password);
@@ -46,16 +117,15 @@ require_once __DIR__ . '/Haiwang.php';      // 海王
 //     echo "实际总共抓取：" . count($finalData->numbers) . " 个号码\n\r";
 //     echo "号码列表：\n\r";
 //     echo dd($finalData->numbers);
-    
 // } catch (Exception $e) {
 //     echo "🚨 抓取异常：" . $e->getMessage() . "\n\r";
 // }
 
 // try {
 //     echo "🚀 开始执行<火箭工单>抓取任务 (多引擎智能调度)...\n\r";
-//     $pageUrl = 'https://s.url99.me/ygn9zjr8';     // PageUrl 入口授权页
+//     $pageUrl = 'https://s.url99.me/68vfje8m';     // PageUrl 入口授权页
 //     $username = "";     // 登录账号
-//     $password = "123456";     // 登录密码
+//     $password = "542187";     // 登录密码
 //     $spider = new Huojian($pageUrl, $username, $password);
 //     $finalData = $spider->run();
 
@@ -96,27 +166,27 @@ require_once __DIR__ . '/Haiwang.php';      // 海王
 //     echo "🚨 抓取异常：" . $e->getMessage() . "\n\r";
 // }
 
-try {
+// try {
-    echo "🚀 开始执行<海王>抓取任务 (多引擎智能调度)...\n\r";
+//     echo "🚀 开始执行<海王>抓取任务 (多引擎智能调度)...\n\r";
-    $pageUrl = 'https://admin.haiwangweb.com/web#/accountshow/pZsEulYrb';     // PageUrl 入口授权页
+//     $pageUrl = 'https://admin.haiwangweb.com/web#/accountshow/pZsEulYrb';     // PageUrl 入口授权页
-    $username = "";     // 登录账号
+//     $username = "";     // 登录账号
-    $password = "9999";     // 登录密码
+//     $password = "9999";     // 登录密码
-    $spider = new Haiwang($pageUrl, $username, $password);
+//     $spider = new Haiwang($pageUrl, $username, $password);
-    $finalData = $spider->run();
+//     $finalData = $spider->run();
 
-    echo "✅ 任务完成！统一数据如下：\n\r";
+//     echo "✅ 任务完成！统一数据如下：\n\r";
-    echo "----------------------------------------\n\r";
+//     echo "----------------------------------------\n\r";
-    echo "当日新增：{$finalData->todayNewCount} 人\n\r";
+//     echo "当日新增：{$finalData->todayNewCount} 人\n\r";
-    echo "在线号码：{$finalData->totalOnline} 个\n\r";
+//     echo "在线号码：{$finalData->totalOnline} 个\n\r";
-    echo "离线号码：{$finalData->totalOffline} 个\n\r";
+//     echo "离线号码：{$finalData->totalOffline} 个\n\r";
-    echo "Total：" . $finalData->total . " 个号码\n\r";
+//     echo "Total：" . $finalData->total . " 个号码\n\r";
-    echo "实际总共抓取：" . count($finalData->numbers) . " 个号码\n\r";
+//     echo "实际总共抓取：" . count($finalData->numbers) . " 个号码\n\r";
-    echo "号码列表：\n\r";
+//     echo "号码列表：\n\r";
-    echo dd($finalData->numbers);
+//     echo dd($finalData->numbers);
     
-} catch (Exception $e) {
+// } catch (Exception $e) {
-    echo "🚨 抓取异常：" . $e->getMessage() . "\n\r";
+//     echo "🚨 抓取异常：" . $e->getMessage() . "\n\r";
-}
+// }
 
 // try {
 //     echo "🚀 开始执行<CEO SCRM>抓取任务 (多引擎智能调度)...\n\r";

application/admin/command/Install/split_config_chatknow.sql

@@ -0,0 +1,6 @@
+-- Chatknow SCRM 工单云控自动同步周期（分钟，0=不自动同步）
+SET NAMES utf8mb4;
+
+INSERT INTO `fa_config` (`name`, `group`, `title`, `tip`, `type`, `visible`, `value`, `content`, `rule`, `extend`, `setting`)
+SELECT 'split_sync_interval_chatknow', 'split', 'Chatknow SCRM同步周期(分钟)', '0 表示不自动同步', 'number', '', '5', '', '', '', NULL
+FROM DUAL WHERE NOT EXISTS (SELECT 1 FROM `fa_config` WHERE `name` = 'split_sync_interval_chatknow' LIMIT 1);

application/admin/command/Install/split_config_fix_ss_customer.sql

@@ -0,0 +1,14 @@
+-- 修复 SS 云控同步周期配置键名拼写错误：ss_custome -> ss_customer
+SET NAMES utf8mb4;
+
+UPDATE `fa_config`
+SET `name` = 'split_sync_interval_ss_customer'
+WHERE `name` = 'split_sync_interval_ss_custome'
+  AND NOT EXISTS (SELECT 1 FROM (SELECT `id` FROM `fa_config` WHERE `name` = 'split_sync_interval_ss_customer') AS `t`);
+
+UPDATE `fa_config` AS `correct`
+INNER JOIN `fa_config` AS `wrong` ON `wrong`.`name` = 'split_sync_interval_ss_custome'
+SET `correct`.`value` = `wrong`.`value`
+WHERE `correct`.`name` = 'split_sync_interval_ss_customer';
+
+DELETE FROM `fa_config` WHERE `name` = 'split_sync_interval_ss_custome';

application/admin/command/Install/split_number.sql

@@ -71,6 +71,13 @@ WHERE m.name = 'split.number' AND m.ismenu = 1
   AND NOT EXISTS (SELECT 1 FROM `fa_auth_rule` WHERE `name` = 'split.number/batchupdate' LIMIT 1)
 LIMIT 1;
 
+INSERT INTO `fa_auth_rule` (`type`, `pid`, `name`, `title`, `icon`, `condition`, `remark`, `ismenu`, `createtime`, `updatetime`, `weigh`, `status`)
+SELECT 'file', m.id, 'split.number/batchoperate', '批量操作号码', 'fa fa-circle-o', '', '', 0, UNIX_TIMESTAMP(), UNIX_TIMESTAMP(), 0, 'normal'
+FROM `fa_auth_rule` m
+WHERE m.name = 'split.number' AND m.ismenu = 1
+  AND NOT EXISTS (SELECT 1 FROM `fa_auth_rule` WHERE `name` = 'split.number/batchoperate' LIMIT 1)
+LIMIT 1;
+
 INSERT INTO `fa_auth_rule` (`type`, `pid`, `name`, `title`, `icon`, `condition`, `remark`, `ismenu`, `createtime`, `updatetime`, `weigh`, `status`)
 SELECT 'file', m.id, 'split.number/multi', '批量更新', 'fa fa-circle-o', '', '列表状态开关', 0, UNIX_TIMESTAMP(), UNIX_TIMESTAMP(), 0, 'normal'
 FROM `fa_auth_rule` m

application/admin/command/SplitSyncTickets.php

@@ -4,6 +4,7 @@ declare(strict_types=1);
 
 namespace app\admin\command;
 
+use app\common\service\SplitCronLockService;
 use app\common\service\SplitTicketSyncLogger;
 use app\common\service\SplitTicketSyncService;
 use think\console\Command;
@@ -51,8 +52,20 @@ class SplitSyncTickets extends Command
             return;
         }
 
-        $count = $service->syncDueTickets();
+        $cronLock = new SplitCronLockService();
-        $output->writeln('<info>本次处理工单数: ' . $count . '</info>');
+        if (!$cronLock->acquire()) {
+            SplitTicketSyncLogger::log('cli', 'cron lock busy, skip');
+            $output->writeln('<comment>上一轮同步仍在执行，跳过本次</comment>');
+            return;
+        }
+
+        try {
+            $count = $service->syncDueTickets();
+            $output->writeln('<info>本次处理工单数: ' . $count . '</info>');
+        } finally {
+            $cronLock->release();
+        }
+
         if (SplitTicketSyncLogger::isEnabled()) {
             $output->writeln('<comment>调试日志已写入 runtime/log/split_sync.log</comment>');
         }

application/admin/controller/split/Link.php

@@ -64,10 +64,35 @@ class Link extends Backend
         $this->assignconfig('ipProtectList', $this->model->getIpProtectList());
         $this->assignconfig('randomShuffleList', $this->model->getRandomShuffleList());
         $this->assignconfig('statusList', $this->model->getStatusList());
+        $this->assignconfig('linkFilterList', $this->buildLinkFilterList());
 
         $this->setupPatchFrontend();
     }
 
+    /**
+     * 分流链接列表筛选下拉（id => 链接码 - 描述）
+     *
+     * @return array<string, string>
+     */
+    private function buildLinkFilterList(): array
+    {
+        $query = $this->model->order('id', 'desc');
+        if ($this->dataLimit) {
+            $adminIds = $this->getDataLimitAdminIds();
+            if (is_array($adminIds)) {
+                $query->where('admin_id', 'in', $adminIds);
+            }
+        }
+        $list = [];
+        foreach ($query->field('id,link_code,description')->select() as $row) {
+            $code = (string) $row['link_code'];
+            $desc = (string) $row['description'];
+            $label = $desc !== '' ? $code . ' - ' . $desc : $code;
+            $list[(string) $row['id']] = $label;
+        }
+        return $list;
+    }
+
     /**
      * 未部署 JS 到 public 时，或 patches 版本较新时，jsname 指向 script 接口
      */

application/admin/controller/split/Number.php

@@ -29,6 +29,9 @@ class Number extends Backend
 
     protected $dataLimit = 'personal';
 
+    /** 关联 splitLink 预载入时需为筛选/排序字段加表别名，避免 status 等列歧义 */
+    protected $relationSearch = true;
+
     protected $modelValidate = true;
 
     protected $modelSceneValidate = true;
@@ -62,6 +65,8 @@ class Number extends Backend
         $this->assignconfig('statusList', $this->model->getStatusList());
         $this->assignconfig('manualManageList', $this->model->getManualManageList());
         $this->assignconfig('platformStatusList', $this->model->getPlatformStatusList());
+        $this->assignconfig('splitLinkFilterList', $this->buildNumberSplitLinkFilterList());
+        $this->assignconfig('splitLinkSelectList', $this->buildSplitLinkSelectConfig());
 
         $this->setupPatchFrontend();
     }
@@ -111,6 +116,52 @@ class Number extends Backend
         return $list;
     }
 
+    /**
+     * 已有号码关联的分流链接（供列表筛选下拉）
+     *
+     * @return array<string, string>
+     */
+    private function buildNumberSplitLinkFilterList(): array
+    {
+        $numberTable = $this->model->getTable();
+        $linkTable = (new LinkModel())->getTable();
+        $query = Db::table($numberTable)
+            ->alias('n')
+            ->join($linkTable . ' l', 'n.split_link_id = l.id')
+            ->where('n.split_link_id', '>', 0)
+            ->group('n.split_link_id')
+            ->field('l.id,l.link_code,l.description')
+            ->order('l.id', 'desc');
+        if ($this->dataLimit) {
+            $adminIds = $this->getDataLimitAdminIds();
+            if (is_array($adminIds)) {
+                $query->where('n.admin_id', 'in', $adminIds);
+            }
+        }
+        $list = [];
+        foreach ($query->select() as $row) {
+            $code = (string) $row['link_code'];
+            $desc = (string) $row['description'];
+            $label = $desc !== '' ? $code . ' - ' . $desc : $code;
+            $list[(string) $row['id']] = $label;
+        }
+        return $list;
+    }
+
+    /**
+     * 全部分流链接（供批量操作弹窗可搜索下拉）
+     *
+     * @return array<string, string>
+     */
+    private function buildSplitLinkSelectConfig(): array
+    {
+        $list = [];
+        foreach ($this->buildSplitLinkList() as $row) {
+            $list[(string) $row['id']] = (string) $row['label'];
+        }
+        return $list;
+    }
+
     private function fetchPatch(string $template): string
     {
         $patchFile = ROOT_PATH . self::PATCH_VIEW_DIR . $template . '.html';
@@ -395,6 +446,85 @@ class Number extends Backend
         $this->success(__('Batch update success'));
     }
 
+    /**
+     * 按分流链接 + 号码文本批量开启/关闭/删除
+     */
+    public function batchoperate(): void
+    {
+        if (false === $this->request->isPost()) {
+            $this->error(__('Invalid parameters'));
+        }
+
+        $splitLinkId = (int) $this->request->post('split_link_id', 0);
+        $numbersText = (string) $this->request->post('numbers', '');
+        $action = (string) $this->request->post('action', '');
+
+        if ($splitLinkId <= 0) {
+            $this->error(__('Please select split link'));
+        }
+
+        $numberList = NumberModel::parseNumbersText($numbersText);
+        if ($numberList === []) {
+            $this->error(__('Please fill at least one number'));
+        }
+
+        $allowedActions = ['enable', 'disable', 'delete'];
+        if (!in_array($action, $allowedActions, true)) {
+            $this->error(__('Invalid batch operate action'));
+        }
+
+        $linkQuery = (new LinkModel())->where('id', $splitLinkId)->where('status', 'normal');
+        if ($this->dataLimit) {
+            $adminIds = $this->getDataLimitAdminIds();
+            if (is_array($adminIds)) {
+                $linkQuery->where('admin_id', 'in', $adminIds);
+            }
+        }
+        if (!$linkQuery->find()) {
+            $this->error(__('No Results were found'));
+        }
+
+        $query = $this->model
+            ->where('split_link_id', $splitLinkId)
+            ->where('number', 'in', $numberList);
+        if ($this->dataLimit) {
+            $adminIds = $this->getDataLimitAdminIds();
+            if (is_array($adminIds)) {
+                $query->where('admin_id', 'in', $adminIds);
+            }
+        }
+
+        $count = 0;
+        Db::startTrans();
+        try {
+            if ($action === 'delete') {
+                $rows = $query->select();
+                foreach ($rows as $row) {
+                    if ($row->delete()) {
+                        $count++;
+                    }
+                }
+            } else {
+                $status = $action === 'enable' ? 'normal' : 'hidden';
+                $manualManage = $action === 'enable' ? 0 : 1;
+                $count = (int) $query->update([
+                    'status'        => $status,
+                    'manual_manage' => $manualManage,
+                ]);
+            }
+            Db::commit();
+        } catch (PDOException|Exception $e) {
+            Db::rollback();
+            $this->error($e->getMessage());
+        }
+
+        if ($count <= 0) {
+            $this->error(__('No matching numbers found'));
+        }
+
+        $this->success(sprintf(__('Batch operate success'), $count));
+    }
+
     /**
      * 排除不可由表单提交的字段
      *

application/admin/controller/split/Ticket.php

@@ -58,6 +58,7 @@ class Ticket extends Backend
         $this->assignconfig('ticketTypeList', $this->model->getTicketTypeList());
         $this->assignconfig('numberTypeList', $this->model->getNumberTypeList());
         $this->assignconfig('statusList', $this->model->getStatusList());
+        $this->assignconfig('splitLinkFilterList', $this->buildTicketSplitLinkFilterList());
         $this->assignconfig([
             'syncConfirmMsg'           => __('Sync confirm'),
             'syncBackgroundStartedMsg' => __('Sync background started'),
@@ -142,6 +143,71 @@ class Ticket extends Backend
         return $list;
     }
 
+    /**
+     * 已有工单关联的分流链接（供列表筛选下拉）
+     *
+     * @return array<string, string> id => label
+     */
+    private function buildTicketSplitLinkFilterList(): array
+    {
+        $ticketTable = $this->model->getTable();
+        $linkTable = (new LinkModel())->getTable();
+        $query = Db::table($ticketTable)
+            ->alias('t')
+            ->join($linkTable . ' l', 't.split_link_id = l.id')
+            ->where('t.split_link_id', '>', 0)
+            ->group('t.split_link_id')
+            ->field('l.id,l.link_code,l.description')
+            ->order('l.id', 'desc');
+        if ($this->dataLimit) {
+            $adminIds = $this->getDataLimitAdminIds();
+            if (is_array($adminIds)) {
+                $query->where('t.admin_id', 'in', $adminIds);
+            }
+        }
+        $list = [];
+        foreach ($query->select() as $row) {
+            $code = (string) $row['link_code'];
+            $desc = (string) $row['description'];
+            $label = $desc !== '' ? $code . ' - ' . $desc : $code;
+            $list[(string) $row['id']] = $label;
+        }
+        return $list;
+    }
+
+    /**
+     * 按当前筛选条件汇总列表统计列
+     *
+     * @param callable|array<mixed> $where buildparams() 返回的闭包或条件数组
+     * @return array<string, int|float|string>
+     */
+    private function buildListSummary($where): array
+    {
+        $stats = $this->model
+            ->where($where)
+            ->fieldRaw(
+                'COALESCE(SUM(ticket_total), 0) AS sum_ticket_total,'
+                . ' COALESCE(SUM(complete_count), 0) AS sum_complete_count,'
+                . ' COALESCE(SUM(speed_per_hour), 0) AS sum_speed_per_hour,'
+                . ' COALESCE(AVG(CASE WHEN ticket_total > 0 THEN complete_count * 100.0 / ticket_total ELSE 0 END), 0) AS avg_ticket_progress'
+            )
+            ->find();
+        if (!$stats) {
+            return [
+                'ticket_total'         => 0,
+                'complete_count'       => 0,
+                'speed_per_hour'       => '0.00',
+                'ticket_progress_text' => '0.00%',
+            ];
+        }
+        return [
+            'ticket_total'         => (int) ($stats['sum_ticket_total'] ?? 0),
+            'complete_count'       => (int) ($stats['sum_complete_count'] ?? 0),
+            'speed_per_hour'       => number_format((float) ($stats['sum_speed_per_hour'] ?? 0), 2, '.', ''),
+            'ticket_progress_text' => number_format((float) ($stats['avg_ticket_progress'] ?? 0), 2, '.', '') . '%',
+        ];
+    }
+
     private function fetchPatch(string $template): string
     {
         $patchFile = ROOT_PATH . self::PATCH_VIEW_DIR . $template . '.html';
@@ -179,7 +245,11 @@ class Ticket extends Backend
             ->where($where)
             ->order($sort, $order)
             ->paginate($limit);
-        $result = ['total' => $list->total(), 'rows' => $list->items()];
+        $result = [
+            'total'   => $list->total(),
+            'rows'    => $list->items(),
+            'summary' => $this->buildListSummary($where),
+        ];
         return json($result);
     }
 
@@ -331,6 +401,10 @@ class Ticket extends Backend
     public function add()
     {
         if (false === $this->request->isPost()) {
+            $copyRow = $this->buildCopyRowData();
+            if ($copyRow !== null) {
+                $this->view->assign('row', $copyRow);
+            }
             return $this->fetchPatch('add');
         }
         $params = $this->request->post('row/a', []);
@@ -367,6 +441,60 @@ class Ticket extends Backend
         $this->success('', null, ['id' => (int) $this->model->id]);
     }
 
+    /**
+     * 从 copy_id 构建添加工单表单的预填数据（仅复制业务字段，不含同步统计）
+     *
+     * @return array<string, mixed>|null
+     */
+    private function buildCopyRowData(): ?array
+    {
+        $copyId = (int) $this->request->get('copy_id/d', 0);
+        if ($copyId <= 0) {
+            return null;
+        }
+
+        $row = $this->model->get($copyId);
+        if (!$row) {
+            return null;
+        }
+
+        $adminIds = $this->getDataLimitAdminIds();
+        if (is_array($adminIds) && !in_array((int) $row[$this->dataLimitField], $adminIds, true)) {
+            return null;
+        }
+
+        $data = $row->toArray();
+        $copyFields = [
+            'ticket_type',
+            'ticket_name',
+            'ticket_url',
+            'ticket_total',
+            'split_link_id',
+            'number_type',
+            'number_type_custom',
+            'order_limit',
+            'assign_ratio',
+            'account',
+            'password',
+        ];
+        $copyRow = [];
+        foreach ($copyFields as $field) {
+            if (array_key_exists($field, $data)) {
+                $copyRow[$field] = $data[$field];
+            }
+        }
+
+        $copyRow['start_time'] = $data['start_time_text'] ?? '';
+        $copyRow['end_time'] = $data['end_time_text'] ?? '';
+
+        $name = trim((string) ($copyRow['ticket_name'] ?? ''));
+        if ($name !== '' && mb_strpos($name, ' (副本)') === false) {
+            $copyRow['ticket_name'] = $name . ' (副本)';
+        }
+
+        return $copyRow;
+    }
+
     /**
      * @param string|null $ids
      * @return string

application/admin/lang/zh-cn/split/link.php

@@ -37,7 +37,7 @@ return [
     'System config'       => '系统配置',
     'Auto reply'          => '自动回复',
     'Reply statements'    => '回复语句',
-    'Reply statements tip'=> '一行填写一条回复语句，保存后与当前分流链接关联',
+    'Reply statements tip'=> '一行填写一条回复语句，保存后与当前分流链接关联；跳转 WhatsApp / Telegram 时随机附加为预填消息',
     'Auto reply saved'    => '自动回复已保存',
     'Reply statements column' => '回复语',
     'NS'                  => 'NS',

application/admin/lang/zh-cn/split/number.php

@@ -30,6 +30,18 @@ return [
     'Batch selected count'  => '已选号码',
     'Batch update status'   => '更新状态',
     'Batch update btn'      => '更新状态',
+    'Batch operate btn'     => '批量操作',
+    'Batch operate title'   => '批量操作',
+    'Batch operate action'  => '操作',
+    'Batch operate enable'  => '开启状态',
+    'Batch operate disable' => '关闭状态',
+    'Batch operate delete'  => '删除号码',
+    'Batch operate success' => '批量操作成功，共处理 %d 条',
+    'Invalid batch operate action' => '操作类型无效',
+    'No matching numbers found'    => '未找到匹配的号码',
+    'Please select split link'     => '请选择分流链接',
+    'Numbers one per line'         => '一行一个号码',
+    'Batch operate delete confirm' => '确定要删除这些号码吗？',
     'Please fill at least one number' => '请至少填写一个有效号码',
     'All numbers already exist for this link' => '该链接下号码均已存在，未新增任何记录',
     'Number already exists for this link' => '该链接下已存在相同号码',

application/admin/lang/zh-cn/split/ticket.php

@@ -38,6 +38,8 @@ return [
     'Sync display pending'  => '待同步',
     'Sync display error'    => '同步异常',
     'Createtime'            => '创建时间',
+    'Copy'                  => '拷贝',
+    'Summary row'           => '汇总',
     'Section basic'         => '基础信息',
     'Section time rule'     => '时间与规则',
     'Section account'       => '账号信息',
@@ -51,6 +53,7 @@ return [
     'Ticket type yifafa'    => '译发发云控',
     'Ticket type a2c'       => 'A2C云控',
     'Ticket type ceo_scrm'  => 'CEO SCRM',
+    'Ticket type chatknow'  => 'Chatknow SCRM',
     'Ticket type whatshub'  => 'Whatshub云控',
     'Ticket type sihai'     => '四海云控',
     'End time must after start' => '到期时间必须晚于开始时间',

application/admin/model/split/Number.php

@@ -98,7 +98,7 @@ class Number extends Model
      */
     public function splitLink()
     {
-        return $this->belongsTo(Link::class, 'split_link_id', 'id', [], 'LEFT')->setEagerlyType(0);
+        return $this->belongsTo(Link::class, 'split_link_id', 'id', [], 'LEFT')->setEagerlyType(1);
     }
 
     public function setNumberTypeCustomAttr($value): string

application/admin/model/split/Ticket.php

@@ -50,6 +50,7 @@ class Ticket extends Model
             'yifafa'      => __('Ticket type yifafa'),
             'a2c'         => __('Ticket type a2c'),
             'ceo_scrm'    => __('Ticket type ceo_scrm'),
+            'chatknow'    => __('Ticket type chatknow'),
             'whatshub'    => __('Ticket type whatshub'),
             'sihai'       => __('Ticket type sihai'),
         ];

application/admin/view/split/number/index.html

@@ -18,6 +18,7 @@
                         <a href="javascript:;" class="btn btn-success btn-edit btn-disabled disabled {:$auth->check('split.number/edit')?'':'hide'}" title="{:__('Edit')}"><i class="fa fa-pencil"></i> {:__('Edit')}</a>
                         <a href="javascript:;" class="btn btn-danger btn-del btn-disabled disabled {:$auth->check('split.number/del')?'':'hide'}" title="{:__('Delete')}"><i class="fa fa-trash"></i> {:__('Delete')}</a>
                         <a href="javascript:;" class="btn btn-warning btn-batch-update-status btn-disabled disabled {:$auth->check('split.number/batchupdate')?'':'hide'}" title="{:__('Batch update btn')}"><i class="fa fa-edit"></i> {:__('Batch update btn')}</a>
+                        <a href="javascript:;" class="btn btn-info btn-batch-operate {:$auth->check('split.number/batchoperate')?'':'hide'}" title="{:__('Batch operate btn')}"><i class="fa fa-list-alt"></i> {:__('Batch operate btn')}</a>
                     </div>
                     <table id="table" class="table table-striped table-bordered table-hover table-nowrap"
                            data-operate-edit="{:$auth->check('split.number/edit')}"

application/admin/view/split/ticket/index.html

@@ -17,12 +17,56 @@
         text-align: left;
         animation: split-ticket-sync-dots 1.4s steps(4, end) infinite;
     }
+    .split-ticket-url-group {
+        width: 200px;
+        max-width: 100%;
+        margin: 0;
+    }
+    .split-ticket-url-group .form-control {
+        cursor: default;
+        text-overflow: ellipsis;
+        overflow: hidden;
+        white-space: nowrap;
+        background: #fff;
+        height: 30px;
+    }
+    .split-ticket-url-group .btn {
+        height: 30px;
+        padding: 5px 10px;
+    }
     @keyframes split-ticket-sync-dots {
         0%, 20% { content: ''; }
         40% { content: '.'; }
         60% { content: '..'; }
         80%, 100% { content: '...'; }
     }
+    .split-ticket-summary-bar {
+        margin: 0 0 10px;
+        padding: 10px 14px;
+        background: linear-gradient(180deg, #eff6ff 0%, #dbeafe 100%);
+        border: 1px solid #93c5fd;
+        border-radius: 4px;
+        display: flex;
+        flex-wrap: wrap;
+        align-items: center;
+        gap: 8px 24px;
+        font-size: 13px;
+        line-height: 1.5;
+    }
+    .split-ticket-summary-bar .split-ticket-summary-label {
+        font-weight: 700;
+        color: #1e40af;
+        margin-right: 4px;
+    }
+    .split-ticket-summary-bar .split-ticket-summary-item em {
+        font-style: normal;
+        color: #475569;
+        margin-right: 6px;
+    }
+    .split-ticket-summary-bar .split-ticket-summary-item b {
+        font-size: 14px;
+        color: #0f172a;
+    }
 </style>
 <div class="panel panel-default panel-intro">
     <div class="panel-heading">
@@ -39,6 +83,13 @@
                         <a href="javascript:;" class="btn btn-danger btn-del btn-disabled disabled {:$auth->check('split.ticket/del')?'':'hide'}" title="{:__('Delete')}"><i class="fa fa-trash"></i> {:__('Delete')}</a>
                         <a href="javascript:;" class="btn btn-info btn-sync btn-disabled disabled {:$auth->check('split.ticket/sync')?'':'hide'}" title="{:__('Sync_status_btn')}"><i class="fa fa-refresh"></i> {:__('Sync_status_btn')}</a>
                     </div>
+                    <div id="split-ticket-summary" class="split-ticket-summary-bar hide">
+                        <span class="split-ticket-summary-label">{:__('Summary row')}</span>
+                        <span class="split-ticket-summary-item"><em>{:__('Ticket_total')}</em><b data-sum="ticket_total">0</b></span>
+                        <span class="split-ticket-summary-item"><em>{:__('Complete_count')}</em><b data-sum="complete_count">0</b></span>
+                        <span class="split-ticket-summary-item"><em>{:__('Ticket_progress')}</em><b data-sum="ticket_progress_text">0.00%</b></span>
+                        <span class="split-ticket-summary-item"><em>{:__('Speed_per_hour')}</em><b data-sum="speed_per_hour">0.00</b></span>
+                    </div>
                     <table id="table" class="table table-striped table-bordered table-hover table-nowrap"
                            data-operate-edit="{:$auth->check('split.ticket/edit')}"
                            data-operate-del="{:$auth->check('split.ticket/del')}"

application/common/library/CountryIso.php

@@ -15,63 +15,255 @@ class CountryIso
      * @var array<string, string>
      */
     private const COUNTRIES = [
-        'CN' => '中国',
+        'AD' => '安道尔',
-        'HK' => '中国香港',
+        'AE' => '阿拉伯联合酋长国',
-        'MO' => '中国澳门',
+        'AF' => '阿富汗',
-        'TW' => '中国台湾',
+        'AG' => '安提瓜和巴布达',
-        'US' => '美国',
+        'AI' => '安圭拉',
-        'CA' => '加拿大',
+        'AL' => '阿尔巴尼亚',
-        'GB' => '英国',
+        'AM' => '亚美尼亚',
-        'DE' => '德国',
+        'AO' => '安哥拉',
-        'FR' => '法国',
+        'AQ' => '南极洲',
-        'IT' => '意大利',
-        'ES' => '西班牙',
-        'NL' => '荷兰',
-        'BE' => '比利时',
-        'CH' => '瑞士',
-        'AT' => '奥地利',
-        'SE' => '瑞典',
-        'NO' => '挪威',
-        'DK' => '丹麦',
-        'FI' => '芬兰',
-        'IE' => '爱尔兰',
-        'PT' => '葡萄牙',
-        'PL' => '波兰',
-        'CZ' => '捷克',
-        'HU' => '匈牙利',
-        'RO' => '罗马尼亚',
-        'GR' => '希腊',
-        'RU' => '俄罗斯',
-        'UA' => '乌克兰',
-        'TR' => '土耳其',
-        'IL' => '以色列',
-        'SA' => '沙特阿拉伯',
-        'AE' => '阿联酋',
-        'QA' => '卡塔尔',
-        'KW' => '科威特',
-        'IN' => '印度',
-        'PK' => '巴基斯坦',
-        'BD' => '孟加拉国',
-        'TH' => '泰国',
-        'VN' => '越南',
-        'MY' => '马来西亚',
-        'SG' => '新加坡',
-        'ID' => '印度尼西亚',
-        'PH' => '菲律宾',
-        'JP' => '日本',
-        'KR' => '韩国',
-        'AU' => '澳大利亚',
-        'NZ' => '新西兰',
-        'BR' => '巴西',
-        'MX' => '墨西哥',
         'AR' => '阿根廷',
+        'AS' => '美属萨摩亚',
+        'AT' => '奥地利',
+        'AU' => '澳大利亚',
+        'AW' => '阿鲁巴',
+        'AX' => '奥兰群岛',
+        'AZ' => '阿塞拜疆',
+        'BA' => '波斯尼亚和黑塞哥维那',
+        'BB' => '巴巴多斯',
+        'BD' => '孟加拉国',
+        'BE' => '比利时',
+        'BF' => '布基纳法索',
+        'BG' => '保加利亚',
+        'BH' => '巴林',
+        'BI' => '布隆迪',
+        'BJ' => '贝宁',
+        'BL' => '圣巴泰勒米',
+        'BM' => '百慕大',
+        'BN' => '文莱',
+        'BO' => '玻利维亚',
+        'BQ' => '荷兰加勒比区',
+        'BR' => '巴西',
+        'BS' => '巴哈马',
+        'BT' => '不丹',
+        'BV' => '布韦岛',
+        'BW' => '博茨瓦纳',
+        'BY' => '白俄罗斯',
+        'BZ' => '伯利兹',
+        'CA' => '加拿大',
+        'CC' => '科科斯（基林）群岛',
+        'CD' => '刚果（金）',
+        'CF' => '中非共和国',
+        'CG' => '刚果（布）',
+        'CH' => '瑞士',
+        'CI' => '科特迪瓦',
+        'CK' => '库克群岛',
         'CL' => '智利',
+        'CM' => '喀麦隆',
+        'CN' => '中国',
         'CO' => '哥伦比亚',
-        'PE' => '秘鲁',
+        'CR' => '哥斯达黎加',
-        'ZA' => '南非',
+        'CU' => '古巴',
+        'CV' => '佛得角',
+        'CW' => '库拉索',
+        'CX' => '圣诞岛',
+        'CY' => '塞浦路斯',
+        'CZ' => '捷克',
+        'DE' => '德国',
+        'DJ' => '吉布提',
+        'DK' => '丹麦',
+        'DM' => '多米尼克',
+        'DO' => '多米尼加共和国',
+        'DZ' => '阿尔及利亚',
+        'EC' => '厄瓜多尔',
+        'EE' => '爱沙尼亚',
         'EG' => '埃及',
-        'NG' => '尼日利亚',
+        'EH' => '西撒哈拉',
+        'ER' => '厄立特里亚',
+        'ES' => '西班牙',
+        'ET' => '埃塞俄比亚',
+        'FI' => '芬兰',
+        'FJ' => '斐济',
+        'FK' => '福克兰群岛（马尔维纳斯）',
+        'FM' => '密克罗尼西亚联邦',
+        'FO' => '法罗群岛',
+        'FR' => '法国',
+        'GA' => '加蓬',
+        'GB' => '英国',
+        'GD' => '格林纳达',
+        'GE' => '格鲁吉亚',
+        'GF' => '法属圭亚那',
+        'GG' => '根西岛',
+        'GH' => '加纳',
+        'GI' => '直布罗陀',
+        'GL' => '格陵兰',
+        'GM' => '冈比亚',
+        'GN' => '几内亚',
+        'GP' => '瓜德罗普',
+        'GQ' => '赤道几内亚',
+        'GR' => '希腊',
+        'GS' => '南乔治亚和南桑威奇群岛',
+        'GT' => '危地马拉',
+        'GU' => '关岛',
+        'GW' => '几内亚比绍',
+        'GY' => '圭亚那',
+        'HK' => '香港',
+        'HM' => '赫德岛和麦克唐纳群岛',
+        'HN' => '洪都拉斯',
+        'HR' => '克罗地亚',
+        'HT' => '海地',
+        'HU' => '匈牙利',
+        'ID' => '印度尼西亚',
+        'IE' => '爱尔兰',
+        'IL' => '以色列',
+        'IM' => '马恩岛',
+        'IN' => '印度',
+        'IO' => '英属印度洋领地',
+        'IQ' => '伊拉克',
+        'IR' => '伊朗',
+        'IS' => '冰岛',
+        'IT' => '意大利',
+        'JE' => '泽西岛',
+        'JM' => '牙买加',
+        'JO' => '约旦',
+        'JP' => '日本',
         'KE' => '肯尼亚',
+        'KG' => '吉尔吉斯斯坦',
+        'KH' => '柬埔寨',
+        'KI' => '基里巴斯',
+        'KM' => '科摩罗',
+        'KN' => '圣基茨和尼维斯',
+        'KP' => '朝鲜',
+        'KR' => '韩国',
+        'KW' => '科威特',
+        'KY' => '开曼群岛',
+        'KZ' => '哈萨克斯坦',
+        'LA' => '老挝',
+        'LB' => '黎巴嫩',
+        'LC' => '圣卢西亚',
+        'LI' => '列支敦士登',
+        'LK' => '斯里兰卡',
+        'LR' => '利比里亚',
+        'LS' => '莱索托',
+        'LT' => '立陶宛',
+        'LU' => '卢森堡',
+        'LV' => '拉脱维亚',
+        'LY' => '利比亚',
+        'MA' => '摩洛哥',
+        'MC' => '摩纳哥',
+        'MD' => '摩尔多瓦',
+        'ME' => '黑山',
+        'MF' => '法属圣马丁',
+        'MG' => '马达加斯加',
+        'MH' => '马绍尔群岛',
+        'MK' => '北马其顿',
+        'ML' => '马里',
+        'MM' => '缅甸',
+        'MN' => '蒙古',
+        'MO' => '澳门',
+        'MP' => '北马里亚纳群岛',
+        'MQ' => '马提尼克',
+        'MR' => '毛里塔尼亚',
+        'MS' => '蒙特塞拉特',
+        'MT' => '马耳他',
+        'MU' => '毛里求斯',
+        'MV' => '马尔代夫',
+        'MW' => '马拉维',
+        'MX' => '墨西哥',
+        'MY' => '马来西亚',
+        'MZ' => '莫桑比克',
+        'NA' => '纳米比亚',
+        'NC' => '新喀里多尼亚',
+        'NE' => '尼日尔',
+        'NF' => '诺福克岛',
+        'NG' => '尼日利亚',
+        'NI' => '尼加拉瓜',
+        'NL' => '荷兰',
+        'NO' => '挪威',
+        'NP' => '尼泊尔',
+        'NR' => '瑙鲁',
+        'NU' => '纽埃',
+        'NZ' => '新西兰',
+        'OM' => '阿曼',
+        'PA' => '巴拿马',
+        'PE' => '秘鲁',
+        'PF' => '法属波利尼西亚',
+        'PG' => '巴布亚新几内亚',
+        'PH' => '菲律宾',
+        'PK' => '巴基斯坦',
+        'PL' => '波兰',
+        'PM' => '圣皮埃尔和密克隆',
+        'PN' => '皮特凯恩群岛',
+        'PR' => '波多黎各',
+        'PS' => '巴勒斯坦',
+        'PT' => '葡萄牙',
+        'PW' => '帕劳',
+        'PY' => '巴拉圭',
+        'QA' => '卡塔尔',
+        'RE' => '留尼汪',
+        'RO' => '罗马尼亚',
+        'RS' => '塞尔维亚',
+        'RU' => '俄罗斯',
+        'RW' => '卢旺达',
+        'SA' => '沙特阿拉伯',
+        'SB' => '所罗门群岛',
+        'SC' => '塞舌尔',
+        'SD' => '苏丹',
+        'SE' => '瑞典',
+        'SG' => '新加坡',
+        'SH' => '圣赫勒拿、阿森松和特里斯坦-达库尼亚',
+        'SI' => '斯洛文尼亚',
+        'SJ' => '斯瓦尔巴和扬马延',
+        'SK' => '斯洛伐克',
+        'SL' => '塞拉利昂',
+        'SM' => '圣马力诺',
+        'SN' => '塞内加尔',
+        'SO' => '索马里',
+        'SR' => '苏里南',
+        'SS' => '南苏丹',
+        'ST' => '圣多美和普林西比',
+        'SV' => '萨尔瓦多',
+        'SX' => '荷属圣马丁',
+        'SY' => '叙利亚',
+        'SZ' => '斯威士兰（斯瓦帝尼）',
+        'TC' => '特克斯和凯科斯群岛',
+        'TD' => '乍得',
+        'TF' => '法属南部领地',
+        'TG' => '多哥',
+        'TH' => '泰国',
+        'TJ' => '塔吉克斯坦',
+        'TK' => '托克劳',
+        'TL' => '东帝汶',
+        'TM' => '土库曼斯坦',
+        'TN' => '突尼斯',
+        'TO' => '汤加',
+        'TR' => '土耳其',
+        'TT' => '特立尼达和多巴哥',
+        'TV' => '图瓦卢',
+        'TW' => '台湾',
+        'TZ' => '坦桑尼亚',
+        'UA' => '乌克兰',
+        'UG' => '乌干达',
+        'UM' => '美国本土外小岛屿',
+        'US' => '美国',
+        'UY' => '乌拉圭',
+        'UZ' => '乌兹别克斯坦',
+        'VA' => '梵蒂冈',
+        'VC' => '圣文森特和格林纳丁斯',
+        'VE' => '委内瑞拉',
+        'VG' => '英属维尔京群岛',
+        'VI' => '美属维尔京群岛',
+        'VN' => '越南',
+        'VU' => '瓦努阿图',
+        'WF' => '瓦利斯和富图纳',
+        'WS' => '萨摩亚',
+        'YE' => '也门',
+        'YT' => '马约特',
+        'ZA' => '南非',
+        'ZM' => '赞比亚',
+        'ZW' => '津巴布韦'
     ];
 
     /**

application/common/library/scrm/AbstractScrmSpider.php

@@ -67,22 +67,36 @@ abstract class AbstractScrmSpider implements ScrmSpiderInterface
             $apiUrlsToIntercept[] = $countApi;
         }
 
+        $antiBot = $config['antiBot'] ?? null;
+
         $initResult = $this->requestNode('/api/auth-and-intercept', [
             'pageUrl'     => $config['pageUrl'],
             'apiUrls'     => $apiUrlsToIntercept,
             'authActions' => $config['authActions'] ?? [],
+            'antiBot'     => $antiBot,
         ]);
 
         if (empty($initResult['success'])) {
+            $cfCode = (string) ($initResult['code'] ?? '');
             SplitTicketSyncLogger::log('spider', 'auth-and-intercept failed', [
-                'error' => $initResult['error'] ?? '未知',
+                'error'         => $initResult['error'] ?? '未知',
+                'code'          => $cfCode !== '' ? $cfCode : null,
+                'challengeType' => $initResult['challengeType'] ?? null,
+                'stage'         => $initResult['stage'] ?? null,
+                'cf'            => $initResult['cf'] ?? null,
             ]);
-            throw new Exception('初始化失败: ' . ($initResult['error'] ?? '未知'));
+            $errMsg = (string) ($initResult['error'] ?? '未知');
+            if ($cfCode === 'CF_TURNSTILE_FAILED') {
+                throw new Exception('Cloudflare Turnstile 验证失败: ' . ($initResult['stage'] ?? 'timeout'));
+            }
+            throw new Exception('初始化失败: ' . $errMsg);
         }
 
         $interceptedApis = $initResult['interceptedApis'];
+        $finalPageUrl = (string) ($initResult['finalPageUrl'] ?? ($config['pageUrl'] ?? ''));
         SplitTicketSyncLogger::log('spider', 'auth-and-intercept ok', [
-            'intercepted' => array_keys($interceptedApis),
+            'intercepted'  => array_keys($interceptedApis),
+            'finalPageUrl' => $finalPageUrl,
         ]);
         $cookies = $initResult['cookies'];
 
@@ -121,6 +135,7 @@ abstract class AbstractScrmSpider implements ScrmSpiderInterface
                         'method'    => $config['listMethod'] ?? 'GET',
                     ]],
                     'cookies' => $cookies,
+                    'antiBot' => $antiBot,
                 ], 120);
 
                 if (!empty($fetchResult['success'])) {
@@ -138,12 +153,14 @@ abstract class AbstractScrmSpider implements ScrmSpiderInterface
                 $uiResult = $this->requestNode('/api/ui-pagination', [
                     'apiUrl'          => $listApi,
                     'pageUrl'         => $config['pageUrl'],
+                    'finalPageUrl'    => $finalPageUrl,
                     'nextBtnSelector' => $uiConfig['nextBtnSelector'] ?? '',
                     'waitMs'          => $uiConfig['waitMs'] ?? 2000,
                     'clicksToPerform' => $clicksToPerform,
                     'cookies'         => $cookies,
                     'firstPageData'   => $firstPageData,
                     'authActions'     => $config['authActions'] ?? [],
+                    'antiBot'         => $antiBot,
                 ], 1200);
 
                 if (!empty($uiResult['success']) && !empty($uiResult['data'])) {
@@ -170,13 +187,43 @@ abstract class AbstractScrmSpider implements ScrmSpiderInterface
      * @return array<string, mixed>
      */
     protected function requestNode(string $endpoint, array $payload, int $timeout = 60): array
+    {
+        $maxAttempts = 3;
+        $lastDecoded = [];
+        for ($attempt = 1; $attempt <= $maxAttempts; $attempt++) {
+            $lastDecoded = $this->doRequestNode($endpoint, $payload, $timeout, $attempt);
+            if (!empty($lastDecoded['success'])) {
+                return $lastDecoded;
+            }
+            $error = (string) ($lastDecoded['error'] ?? '');
+            if (!$this->shouldRetryNodeResponse($lastDecoded, $error) || $attempt >= $maxAttempts) {
+                return $lastDecoded;
+            }
+            $delaySeconds = $attempt;
+            SplitTicketSyncLogger::log('node_retry', 'retry ' . $endpoint, [
+                'attempt' => $attempt + 1,
+                'error'   => $error,
+                'delay'   => $delaySeconds,
+            ]);
+            sleep($delaySeconds);
+        }
+        return $lastDecoded;
+    }
+
+    /**
+     * @param array<string, mixed> $payload
+     * @return array<string, mixed>
+     */
+    private function doRequestNode(string $endpoint, array $payload, int $timeout, int $attempt): array
     {
         $url = $this->nodeHost . $endpoint;
         $started = microtime(true);
+        $logPayload = SplitTicketSyncLogger::isEnabled() ? $payload : self::summarizeNodePayload($payload);
         SplitTicketSyncLogger::log('node_request', 'POST ' . $endpoint, [
             'url'     => $url,
             'timeout' => $timeout,
-            'payload' => $payload,
+            'attempt' => $attempt,
+            'payload' => $logPayload,
         ]);
 
         $ch = curl_init($url);
@@ -184,6 +231,7 @@ abstract class AbstractScrmSpider implements ScrmSpiderInterface
         curl_setopt($ch, CURLOPT_POST, true);
         curl_setopt($ch, CURLOPT_POSTFIELDS, json_encode($payload, JSON_UNESCAPED_UNICODE));
         curl_setopt($ch, CURLOPT_HTTPHEADER, ['Content-Type: application/json']);
+        curl_setopt($ch, CURLOPT_CONNECTTIMEOUT, 5);
         curl_setopt($ch, CURLOPT_TIMEOUT, $timeout);
         $response = curl_exec($ch);
         $httpCode = (int) curl_getinfo($ch, CURLINFO_HTTP_CODE);
@@ -194,6 +242,7 @@ abstract class AbstractScrmSpider implements ScrmSpiderInterface
             SplitTicketSyncLogger::log('node_response', 'curl error on ' . $endpoint, [
                 'httpCode'  => $httpCode,
                 'elapsedMs' => $elapsedMs,
+                'attempt'   => $attempt,
                 'error'     => $err,
             ]);
             throw new Exception($err);
@@ -204,9 +253,62 @@ abstract class AbstractScrmSpider implements ScrmSpiderInterface
         SplitTicketSyncLogger::log('node_response', 'POST ' . $endpoint, array_merge([
             'httpCode'     => $httpCode,
             'elapsedMs'    => $elapsedMs,
+            'attempt'      => $attempt,
             'responseSize' => strlen((string) $response),
         ], $summary));
-        return is_array($decoded) ? $decoded : [];
+        if (!is_array($decoded)) {
+            return ['success' => false, 'error' => 'Node 返回非 JSON', 'httpCode' => $httpCode];
+        }
+        if ($httpCode === 503) {
+            $decoded['success'] = false;
+            $decoded['error'] = (string) ($decoded['error'] ?? '服务繁忙');
+            $decoded['httpCode'] = 503;
+        }
+        return $decoded;
+    }
+
+    /**
+     * @param array<string, mixed> $decoded
+     */
+    private function shouldRetryNodeResponse(array $decoded, string $error): bool
+    {
+        if ((int) ($decoded['httpCode'] ?? 0) === 503) {
+            return true;
+        }
+        $lower = mb_strtolower($error, 'UTF-8');
+        foreach (['排队超时', 'queue_timeout', 'timeout', 'net::', 'navigation', 'connection'] as $needle) {
+            if ($needle !== '' && mb_strpos($lower, mb_strtolower($needle, 'UTF-8')) !== false) {
+                return true;
+            }
+        }
+        return false;
+    }
+
+    /**
+     * @param array<string, mixed> $payload
+     * @return array<string, mixed>
+     */
+    private static function summarizeNodePayload(array $payload): array
+    {
+        $summary = $payload;
+        if (isset($summary['tasks']) && is_array($summary['tasks'])) {
+            $summary['tasks'] = array_map(static function ($task) {
+                if (!is_array($task)) {
+                    return $task;
+                }
+                $copy = $task;
+                if (isset($copy['paramList']) && is_array($copy['paramList'])) {
+                    $copy['paramList_count'] = count($copy['paramList']);
+                    unset($copy['paramList']);
+                }
+                return $copy;
+            }, $summary['tasks']);
+        }
+        if (isset($summary['cookies']) && is_array($summary['cookies'])) {
+            $summary['cookies_count'] = count($summary['cookies']);
+            unset($summary['cookies']);
+        }
+        return $summary;
     }
 
     /**

application/common/library/scrm/spider/ChatknowSpider.php

@@ -0,0 +1,110 @@
+<?php
+
+declare(strict_types=1);
+
+namespace app\common\library\scrm\spider;
+
+use app\common\library\scrm\AbstractScrmSpider;
+use app\common\library\scrm\UnifiedScrmData;
+
+/**
+ * Chatknow SCRM 云控蜘蛛（UI 翻页 + 列表 API 拦截）
+ */
+class ChatknowSpider extends AbstractScrmSpider
+{
+    private const API_LIST = '/user/user/UserInfoChildChannel/list';
+
+    private const DEFAULT_PER_PAGE_COUNT = 10;
+
+    private string $pageUrl;
+
+    private string $account;
+
+    private string $password;
+
+    private UnifiedScrmData $unifiedData;
+
+    public function __construct(
+        string $pageUrl,
+        string $account = '',
+        string $password = '',
+        string $nodeHost = 'http://127.0.0.1:3001'
+    ) {
+        parent::__construct($nodeHost);
+        $this->pageUrl = $pageUrl;
+        $this->account = $account;
+        $this->password = $password;
+        $this->unifiedData = new UnifiedScrmData();
+    }
+
+    /** @return array<string, mixed> */
+    protected function getSpiderConfig(): array
+    {
+        return [
+            'pageUrl'        => $this->pageUrl,
+            'listApi'        => self::API_LIST,
+            'listMethod'     => 'GET',
+            'paginationMode' => self::MODE_UI,
+            'authActions'    => [
+                ['type' => 'wait', 'ms' => 4000],
+            ],
+        ];
+    }
+
+    /**
+     * @param array<string, mixed>|null $listFirstPageData
+     * @param array<string, mixed>|null $countData
+     */
+    protected function extractListTotalPages($listFirstPageData, $countData = null)
+    {
+        $total = (int) ($listFirstPageData['total'] ?? 0);
+        $this->unifiedData->total = $total;
+        $this->unifiedData->todayNewCount = (int) ($listFirstPageData['data']['today_num'] ?? 0);
+
+        if ($total <= self::DEFAULT_PER_PAGE_COUNT) {
+            return 1;
+        }
+
+        return (int) ceil($total / self::DEFAULT_PER_PAGE_COUNT);
+    }
+
+    /** @return array<string, mixed> */
+    protected function buildListPageParams(int $page): array
+    {
+        return ['page' => $page, 'limit' => self::DEFAULT_PER_PAGE_COUNT];
+    }
+
+    /** @return array<string, mixed> */
+    protected function getUiPaginationConfig(): array
+    {
+        return [
+            'nextBtnSelector' => '.tabs-content .arco-pagination-item-next',
+            'waitMs'          => 2000,
+        ];
+    }
+
+    protected function parseToUnifiedData($detailData, array $allListPagesData): UnifiedScrmData
+    {
+        $unifiedData = $this->unifiedData;
+
+        foreach ($allListPagesData as $pageRaw) {
+            if (!is_array($pageRaw)) {
+                continue;
+            }
+            $records = $pageRaw['rows'] ?? [];
+            if (!is_array($records)) {
+                continue;
+            }
+            foreach ($records as $item) {
+                if (!is_array($item) || empty($item['username'])) {
+                    continue;
+                }
+                $number = (string) $item['username'];
+                $isOnline = isset($item['state']) && (int) $item['state'] === 1;
+                $unifiedData->addNumber($number, $isOnline, (int) ($item['today_num'] ?? 0));
+            }
+        }
+
+        return $unifiedData;
+    }
+}

application/common/library/scrm/spider/WhatshubSpider.php

@@ -0,0 +1,138 @@
+<?php
+
+declare(strict_types=1);
+
+namespace app\common\library\scrm\spider;
+
+use app\common\library\scrm\AbstractScrmSpider;
+use app\common\library\scrm\UnifiedScrmData;
+
+/**
+ * Whatshub 云控蜘蛛（Real Browser + Turnstile 过盾 + UI 翻页）
+ *
+ * 时序：Cloudflare Turnstile → 密码弹窗 authActions → API 拦截 → UI 翻页
+ */
+class WhatshubSpider extends AbstractScrmSpider
+{
+    /** 列表 API 路径 */
+    private const API_LIST = '/api/whatshub-counter/workShare/open/detail';
+
+    /** 详情/统计 API 路径 */
+    private const API_DETAILS = '/api/whatshub-counter/workShare/open/statistics';
+
+    /** 默认每页条数 */
+    private const DEFAULT_PER_PAGE_COUNT = 20;
+
+    private string $pageUrl;
+
+    private string $account;
+
+    private string $password;
+
+    private UnifiedScrmData $unifiedData;
+
+    public function __construct(
+        string $pageUrl,
+        string $account = '',
+        string $password = '',
+        string $nodeHost = 'http://127.0.0.1:3001'
+    ) {
+        parent::__construct($nodeHost);
+        $this->pageUrl = $pageUrl;
+        $this->account = $account;
+        $this->password = $password;
+        $this->unifiedData = new UnifiedScrmData();
+    }
+
+    /** @return array<string, mixed> */
+    protected function getSpiderConfig(): array
+    {
+        $host = (string) parse_url($this->pageUrl, PHP_URL_HOST);
+
+        return [
+            'pageUrl'        => $this->pageUrl,
+            'listApi'        => self::API_LIST,
+            'detailApi'      => self::API_DETAILS,
+            'listMethod'     => 'POST',
+            'paginationMode' => self::MODE_UI,
+            'authActions'    => [
+                // Element Plus 密码弹窗：仅注入可见 input
+                ['type' => 'vue_fill', 'selector' => '.el-input__inner', 'value' => $this->password],
+                ['type' => 'wait', 'ms' => 500],
+                ['type' => 'vue_click', 'selector' => '.vxe-button-group .theme--primary'],
+                ['type' => 'wait', 'ms' => 2200],
+            ],
+            // Whatshub 专用：Real Browser + Turnstile + Captcha API 兜底 + 会话复用
+            'antiBot'        => [
+                'enabled'            => true,
+                'profile'            => 'real',
+                'turnstile'          => true,
+                'solverFallback'     => true,
+                'sessionKey'         => 'whatshub:' . $host,
+                'challengeTimeoutMs' => 60000,
+            ],
+        ];
+    }
+
+    /**
+     * @param array<string, mixed>|null $listFirstPageData
+     * @param array<string, mixed>|null $countData
+     */
+    protected function extractListTotalPages($listFirstPageData, $countData = null)
+    {
+        $defaultPerPage = self::DEFAULT_PER_PAGE_COUNT;
+        $this->unifiedData->total = (int) ($listFirstPageData['data']['total'] ?? 0);
+
+        if ($this->unifiedData->total <= $defaultPerPage) {
+            return 1;
+        }
+
+        return (int) ceil($this->unifiedData->total / $defaultPerPage);
+    }
+
+    /** @return array<string, mixed> */
+    protected function buildListPageParams(int $page): array
+    {
+        return ['pageNum' => $page, 'pageSize' => self::DEFAULT_PER_PAGE_COUNT];
+    }
+
+    /** @return array<string, mixed> */
+    protected function getUiPaginationConfig(): array
+    {
+        return [
+            'nextBtnSelector' => '.vxe-pager--next-btn',
+            'waitMs'          => 1500,
+        ];
+    }
+
+    protected function parseToUnifiedData($detailData, array $allListPagesData): UnifiedScrmData
+    {
+        $unifiedData = $this->unifiedData;
+
+        if (is_array($detailData)) {
+            $unifiedData->todayNewCount = (int) ($detailData['data']['dayNewFans'] ?? 0);
+        }
+
+        foreach ($allListPagesData as $pageRaw) {
+            if (!is_array($pageRaw)) {
+                continue;
+            }
+            $records = $pageRaw['data']['rows'] ?? [];
+            if (!is_array($records)) {
+                continue;
+            }
+            foreach ($records as $item) {
+                if (!is_array($item) || empty($item['account'])) {
+                    continue;
+                }
+                $number = (string) $item['account'];
+                $isOnline = isset($item['isOnline']) && (int) $item['isOnline'] === 1;
+                $unifiedData->addNumber($number, $isOnline, (int) ($item['dayNewFans'] ?? 0));
+            }
+        }
+
+        $unifiedData->total = count($unifiedData->numbers);
+
+        return $unifiedData;
+    }
+}

application/common/library/scrm/spider/XingheSpider.php

@@ -4,83 +4,152 @@ declare(strict_types=1);
 
 namespace app\common\library\scrm\spider;
 
-use app\common\library\scrm\AbstractScrmSpider;
+use app\common\library\scrm\ScrmSpiderInterface;
 use app\common\library\scrm\UnifiedScrmData;
+use RuntimeException;
 
 /**
- * 星河云控蜘蛛
+ * 星河云控蜘蛛（纯 PHP cURL 抓取，不依赖 Node Puppeteer）
+ *
+ * 流程：访问带 token 的授权页建立 Cookie 会话 → 分页请求列表 API → 清洗为 UnifiedScrmData
  */
-class XingheSpider extends AbstractScrmSpider
+class XingheSpider implements ScrmSpiderInterface
 {
-    private const API_LIST = '/share/share/api_yinliu_count.html';
+    private const API_PATH = '/share/share/api_yinliu_count.html';
 
     private const DEFAULT_PER_PAGE_COUNT = 10;
 
+    private const CURL_TIMEOUT_SECONDS = 15;
+
+    /** @var resource|\CurlHandle|null */
+    private $ch = null;
+
+    /** @var string|null 临时 Cookie 文件路径，仅在 run() 成功后赋值 */
+    private ?string $cookieFile = null;
+
     private string $pageUrl;
 
     private string $account;
 
     private string $password;
 
+    private string $baseUrl;
+
     private UnifiedScrmData $unifiedData;
 
+    /**
+     * @param string $pageUrl  带 token 的授权页地址
+     * @param string $account  账号（星河云控当前未使用，保留与工厂签名一致）
+     * @param string $password 密码（星河云控当前未使用，保留与工厂签名一致）
+     * @param string $nodeHost Node 地址（星河云控不使用，忽略）
+     */
     public function __construct(
         string $pageUrl,
         string $account = '',
         string $password = '',
-        string $nodeHost = 'http://127.0.0.1:3001'
+        string $nodeHost = ''
     ) {
-        parent::__construct($nodeHost);
+        unset($nodeHost);
+
         $this->pageUrl = $pageUrl;
         $this->account = $account;
         $this->password = $password;
+        $this->baseUrl = $this->resolveBaseUrl($pageUrl);
         $this->unifiedData = new UnifiedScrmData();
     }
 
-    protected function getSpiderConfig(): array
+    /**
+     * 执行抓取并返回统一数据
+     *
+     * @throws RuntimeException
+     */
+    public function run(): UnifiedScrmData
     {
-        return [
+        $cookieFile = tempnam(sys_get_temp_dir(), 'xinghe_spider_cookie_');
-            'pageUrl'        => $this->pageUrl,
+        if ($cookieFile === false) {
-            'listApi'        => self::API_LIST,
+            throw new RuntimeException('无法在系统临时目录创建 Cookie 文件');
-            'listMethod'     => 'GET',
+        }
-            'paginationMode' => self::MODE_FETCH,
+
-            'authActions'    => [
+        $this->cookieFile = $cookieFile;
-                ['type' => 'wait', 'ms' => 2000],
+        $this->ch = curl_init();
-            ],
+        if ($this->ch === false) {
-        ];
+            throw new RuntimeException('cURL 初始化失败');
-    }
+        }
-
+
-    protected function extractListTotalPages($listFirstPageData, $countData = null)
+        try {
-    {
+            curl_setopt_array($this->ch, [
-        $total = (int) ($listFirstPageData['count'] ?? 0);
+                CURLOPT_RETURNTRANSFER => true,
-        $this->unifiedData->total = $total;
+                CURLOPT_HEADER         => false,
-        $this->unifiedData->todayNewCount = (int) ($listFirstPageData['totalRow']['day_sum'] ?? 0);
+                CURLOPT_TIMEOUT        => self::CURL_TIMEOUT_SECONDS,
-        if ($total <= self::DEFAULT_PER_PAGE_COUNT) {
+                CURLOPT_USERAGENT      => 'Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/114.0.0.0 Safari/537.36',
-            return 1;
+                CURLOPT_COOKIEJAR      => $this->cookieFile,
+                CURLOPT_COOKIEFILE     => $this->cookieFile,
+            ]);
+
+            $this->authenticate();
+
+            $firstPageData = $this->fetchApiData($this->buildApiUrl(1));
+            $this->unifiedData->total = (int) ($firstPageData['count'] ?? 0);
+            $this->unifiedData->todayNewCount = (int) ($firstPageData['totalRow']['day_sum'] ?? 0);
+
+            $totalPages = (int) ceil($this->unifiedData->total / self::DEFAULT_PER_PAGE_COUNT);
+            $allListPagesData = [$firstPageData['data'] ?? []];
+
+            for ($page = 2; $page <= $totalPages; $page++) {
+                $pageData = $this->fetchApiData($this->buildApiUrl($page));
+                $allListPagesData[] = $pageData['data'] ?? [];
+            }
+
+            return $this->parseToUnifiedData($allListPagesData);
+        } finally {
+            $this->cleanup();
         }
-        return (int) ceil($total / self::DEFAULT_PER_PAGE_COUNT);
     }
 
-    protected function buildListPageParams(int $page): array
+    /**
+     * 访问授权页面，建立会话 Cookie
+     */
+    private function authenticate(): void
     {
-        return ['page' => $page, 'limit' => self::DEFAULT_PER_PAGE_COUNT];
+        $this->sendRequest($this->pageUrl);
     }
 
-    protected function getUiPaginationConfig(): array
+    /**
+     * 请求 API 并解析 JSON
+     *
+     * @return array<string, mixed>
+     */
+    private function fetchApiData(string $apiPath): array
     {
-        return [
+        $response = $this->sendRequest($this->baseUrl . $apiPath);
-            'nextBtnSelector' => '.layui-laypage-next',
+        $data = json_decode($response, true);
-            'waitMs'          => 2000,
+
-        ];
+        if (json_last_error() !== JSON_ERROR_NONE) {
+            throw new RuntimeException(
+                'JSON 解析失败: ' . json_last_error_msg() . '。原始响应: ' . mb_substr($response, 0, 500, 'UTF-8')
+            );
+        }
+
+        if (!is_array($data)) {
+            throw new RuntimeException('API 返回数据格式无效');
+        }
+
+        return $data;
     }
 
-    protected function parseToUnifiedData($detailData, array $allListPagesData): UnifiedScrmData
+    /**
+     * @param list<mixed> $allListPagesData
+     */
+    private function parseToUnifiedData(array $allListPagesData): UnifiedScrmData
     {
         $unifiedData = $this->unifiedData;
-        foreach ($allListPagesData as $pageRaw) {
+
-            $records = $pageRaw['data'] ?? [];
+        foreach ($allListPagesData as $records) {
+            if (!is_array($records)) {
+                continue;
+            }
             foreach ($records as $item) {
-                if (empty($item['user'])) {
+                if (!is_array($item) || empty($item['user'])) {
                     continue;
                 }
                 $number = (string) $item['user'];
@@ -88,6 +157,88 @@ class XingheSpider extends AbstractScrmSpider
                 $unifiedData->addNumber($number, $isOnline, (int) ($item['day_sum'] ?? 0));
             }
         }
+
         return $unifiedData;
     }
+
+    /**
+     * 发送 cURL 请求
+     */
+    private function sendRequest(string $url): string
+    {
+        if ($this->ch === null) {
+            throw new RuntimeException('cURL 句柄未初始化');
+        }
+
+        curl_setopt($this->ch, CURLOPT_URL, $url);
+        $response = curl_exec($this->ch);
+
+        if ($response === false) {
+            throw new RuntimeException(sprintf('请求失败 [%s]: %s', $url, curl_error($this->ch)));
+        }
+
+        $httpCode = (int) curl_getinfo($this->ch, CURLINFO_HTTP_CODE);
+        if ($httpCode >= 400) {
+            throw new RuntimeException(sprintf('HTTP 请求异常 [%s]，状态码: %d', $url, $httpCode));
+        }
+
+        return (string) $response;
+    }
+
+    /**
+     * 构建分页 API 路径（相对 baseUrl）
+     */
+    private function buildApiUrl(int $page): string
+    {
+        return sprintf(
+            '%s?page=%d&limit=%d&id=&class_id=&is_repet=1&start_time=&end_time=',
+            self::API_PATH,
+            $page,
+            self::DEFAULT_PER_PAGE_COUNT
+        );
+    }
+
+    /**
+     * 从授权页 URL 解析站点根地址
+     */
+    private function resolveBaseUrl(string $pageUrl): string
+    {
+        $parsedUrl = parse_url($pageUrl);
+        if ($parsedUrl === false || empty($parsedUrl['host'])) {
+            throw new RuntimeException('工单链接格式无效，无法解析域名');
+        }
+
+        $scheme = isset($parsedUrl['scheme']) ? $parsedUrl['scheme'] . '://' : 'http://';
+        $port   = isset($parsedUrl['port'])   ? $parsedUrl['port']   : '';
+        if($port !== '' && $port !== 80 && $port !== 443) {
+            $port = ':' . $port;
+        }
+        return $scheme . $parsedUrl['host'] . $port;
+    }
+
+    /**
+     * 释放 cURL 资源并删除临时 Cookie 文件
+     */
+    private function cleanup(): void
+    {
+        if ($this->ch !== null) {
+            if (is_resource($this->ch) || $this->ch instanceof \CurlHandle) {
+                curl_close($this->ch);
+            }
+            $this->ch = null;
+        }
+
+        if ($this->cookieFile !== null && $this->cookieFile !== '' && is_file($this->cookieFile)) {
+            @unlink($this->cookieFile);
+        }
+        $this->cookieFile = null;
+    }
+
+    /**
+     * 兜底清理：防止 run() 异常退出时资源泄漏
+     */
+    public function __destruct()
+    {
+        $this->cleanup();
+    }
 }

application/common/library/scrm/spider/XingheSpider.php.bak

@@ -0,0 +1,93 @@
+<?php
+
+declare(strict_types=1);
+
+namespace app\common\library\scrm\spider;
+
+use app\common\library\scrm\AbstractScrmSpider;
+use app\common\library\scrm\UnifiedScrmData;
+
+/**
+ * 星河云控蜘蛛
+ */
+class XingheSpider extends AbstractScrmSpider
+{
+    private const API_LIST = '/share/share/api_yinliu_count.html';
+
+    private const DEFAULT_PER_PAGE_COUNT = 10;
+
+    private string $pageUrl;
+
+    private string $account;
+
+    private string $password;
+
+    private UnifiedScrmData $unifiedData;
+
+    public function __construct(
+        string $pageUrl,
+        string $account = '',
+        string $password = '',
+        string $nodeHost = 'http://127.0.0.1:3001'
+    ) {
+        parent::__construct($nodeHost);
+        $this->pageUrl = $pageUrl;
+        $this->account = $account;
+        $this->password = $password;
+        $this->unifiedData = new UnifiedScrmData();
+    }
+
+    protected function getSpiderConfig(): array
+    {
+        return [
+            'pageUrl'        => $this->pageUrl,
+            'listApi'        => self::API_LIST,
+            'listMethod'     => 'GET',
+            'paginationMode' => self::MODE_FETCH,
+            'authActions'    => [
+                ['type' => 'wait', 'ms' => 2000],
+            ],
+        ];
+    }
+
+    protected function extractListTotalPages($listFirstPageData, $countData = null)
+    {
+        $total = (int) ($listFirstPageData['count'] ?? 0);
+        $this->unifiedData->total = $total;
+        $this->unifiedData->todayNewCount = (int) ($listFirstPageData['totalRow']['day_sum'] ?? 0);
+        if ($total <= self::DEFAULT_PER_PAGE_COUNT) {
+            return 1;
+        }
+        return (int) ceil($total / self::DEFAULT_PER_PAGE_COUNT);
+    }
+
+    protected function buildListPageParams(int $page): array
+    {
+        return ['page' => $page, 'limit' => self::DEFAULT_PER_PAGE_COUNT];
+    }
+
+    protected function getUiPaginationConfig(): array
+    {
+        return [
+            'nextBtnSelector' => '.layui-laypage-next',
+            'waitMs'          => 2000,
+        ];
+    }
+
+    protected function parseToUnifiedData($detailData, array $allListPagesData): UnifiedScrmData
+    {
+        $unifiedData = $this->unifiedData;
+        foreach ($allListPagesData as $pageRaw) {
+            $records = $pageRaw['data'] ?? [];
+            foreach ($records as $item) {
+                if (empty($item['user'])) {
+                    continue;
+                }
+                $number = (string) $item['user'];
+                $isOnline = isset($item['online']) && (int) $item['online'] === 1;
+                $unifiedData->addNumber($number, $isOnline, (int) ($item['day_sum'] ?? 0));
+            }
+        }
+        return $unifiedData;
+    }
+}

application/common/service/SplitCronLockService.php

@@ -0,0 +1,64 @@
+<?php
+
+declare(strict_types=1);
+
+namespace app\common\service;
+
+/**
+ * 定时同步全局互斥锁，防止每分钟 cron 重叠执行打满 Node 队列
+ */
+class SplitCronLockService
+{
+    private const LOCK_FILE = 'cron.lock';
+
+    /**
+     * 尝试获取全局 cron 锁
+     */
+    public function acquire(): bool
+    {
+        $path = $this->lockPath();
+        if ($this->isStaleLock($path)) {
+            @unlink($path);
+        }
+        if (is_file($path)) {
+            return false;
+        }
+        $payload = json_encode([
+            'pid'  => getmypid(),
+            'time' => time(),
+        ], JSON_UNESCAPED_UNICODE);
+        $written = @file_put_contents($path, $payload, LOCK_EX);
+        return $written !== false;
+    }
+
+    /**
+     * 释放全局 cron 锁
+     */
+    public function release(): void
+    {
+        $path = $this->lockPath();
+        if (is_file($path)) {
+            @unlink($path);
+        }
+    }
+
+    private function lockPath(): string
+    {
+        $runtime = defined('RUNTIME_PATH') ? RUNTIME_PATH : (dirname(__DIR__, 3) . '/runtime/');
+        $dir = $runtime . 'split_ticket_sync/';
+        if (!is_dir($dir)) {
+            @mkdir($dir, 0755, true);
+        }
+        return $dir . self::LOCK_FILE;
+    }
+
+    private function isStaleLock(string $path): bool
+    {
+        if (!is_file($path)) {
+            return false;
+        }
+        $mtime = (int) @filemtime($path);
+        $ttl = SplitSyncConfigService::getCronLockTtlSeconds();
+        return $mtime > 0 && (time() - $mtime) > $ttl;
+    }
+}

application/common/service/SplitFriendUrlBuilder.php

@@ -12,13 +12,13 @@ class SplitFriendUrlBuilder
     /**
      * 构建跳转 URL；无法构建时返回空字符串
      *
-     * @param string $whatsAppReplyText 仅 WhatsApp 类型使用，预填消息文案（urlencode 在内部处理）
+     * @param string $replyText WhatsApp / Telegram 预填消息文案（内部 rawurlencode）
      */
     public static function build(
         string $numberType,
         string $number,
         string $numberTypeCustom = '',
-        string $whatsAppReplyText = ''
+        string $replyText = ''
     ): string {
         $number = trim($number);
         if ($number === '') {
@@ -27,9 +27,9 @@ class SplitFriendUrlBuilder
 
         switch ($numberType) {
             case 'whatsapp':
-                return self::buildWhatsApp($number, $whatsAppReplyText);
+                return self::buildWhatsApp($number, $replyText);
             case 'telegram':
-                return self::buildTelegram($number);
+                return self::buildTelegram($number, $replyText);
             case 'line':
                 return self::buildLine($number);
             case 'custom':
@@ -59,16 +59,22 @@ class SplitFriendUrlBuilder
     }
 
     /**
-     * Telegram：https://t.me/+ 号码（去掉前导 +）
+     * Telegram：https://t.me/+ 号码（去掉前导 +），可选 ?text= 预填消息（须 URL 编码）
      */
-    private static function buildTelegram(string $number): string
+    private static function buildTelegram(string $number, string $replyText = ''): string
     {
         $id = ltrim($number, '+');
         if ($id === '') {
             return '';
         }
 
-        return 'https://t.me/+' . $id;
+        $url = 'https://t.me/+' . $id;
+        $replyText = trim($replyText);
+        if ($replyText !== '') {
+            $url .= '?text=' . rawurlencode($replyText);
+        }
+
+        return $url;
     }
 
     /**

application/common/service/SplitNodeHealthService.php

@@ -0,0 +1,96 @@
+<?php
+
+declare(strict_types=1);
+
+namespace app\common\service;
+
+/**
+ * Node Puppeteer 服务健康与队列负载探测
+ */
+class SplitNodeHealthService
+{
+    /**
+     * 拉取 /api/stats，失败返回 null（不阻断同步，由后续请求快速失败）
+     *
+     * @return array<string, mixed>|null
+     */
+    public static function fetchStats(): ?array
+    {
+        $url = SplitSyncConfigService::getNodeHost() . '/api/stats';
+        $ch = curl_init($url);
+        curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
+        curl_setopt($ch, CURLOPT_CONNECTTIMEOUT, 2);
+        curl_setopt($ch, CURLOPT_TIMEOUT, 3);
+        $response = curl_exec($ch);
+        if (curl_errno($ch)) {
+            curl_close($ch);
+            return null;
+        }
+        $httpCode = (int) curl_getinfo($ch, CURLINFO_HTTP_CODE);
+        curl_close($ch);
+        if ($httpCode !== 200) {
+            return null;
+        }
+        $decoded = json_decode((string) $response, true);
+        return is_array($decoded) ? $decoded : null;
+    }
+
+    /**
+     * 当前是否适合向 Node 提交新 Browser 任务
+     */
+    public static function canAcceptWork(): bool
+    {
+        $stats = self::fetchStats();
+        if ($stats === null) {
+            return true;
+        }
+        if (!empty($stats['shuttingDown'])) {
+            return false;
+        }
+        $queue = is_array($stats['queue'] ?? null) ? $stats['queue'] : [];
+        $config = is_array($stats['config'] ?? null) ? $stats['config'] : [];
+        $queued = (int) ($queue['queued'] ?? 0);
+        $active = (int) ($queue['active'] ?? 0);
+        $max = max(1, (int) ($config['maxConcurrentBrowsers'] ?? ($queue['max'] ?? 4)));
+        $threshold = SplitSyncConfigService::getNodeQueueSkipThreshold();
+        if ($queued >= $threshold) {
+            return false;
+        }
+        return $active < $max;
+    }
+
+    /**
+     * @return array{queued:int,active:int,max:int}
+     */
+    public static function getQueueSnapshot(): array
+    {
+        $stats = self::fetchStats();
+        if ($stats === null) {
+            return ['queued' => 0, 'active' => 0, 'max' => 0];
+        }
+        $queue = is_array($stats['queue'] ?? null) ? $stats['queue'] : [];
+        $config = is_array($stats['config'] ?? null) ? $stats['config'] : [];
+        return [
+            'queued' => (int) ($queue['queued'] ?? 0),
+            'active' => (int) ($queue['active'] ?? 0),
+            'max'    => max(1, (int) ($config['maxConcurrentBrowsers'] ?? ($queue['max'] ?? 4))),
+        ];
+    }
+
+    /**
+     * Node 侧 Real Browser / Captcha 是否就绪（供同步失败日志可读性）
+     *
+     * @return array{realBrowserReady:bool,captchaConfigured:bool}
+     */
+    public static function getAntiBotSnapshot(): array
+    {
+        $stats = self::fetchStats();
+        if ($stats === null) {
+            return ['realBrowserReady' => false, 'captchaConfigured' => false];
+        }
+        return [
+            'realBrowserReady'  => !empty($stats['realBrowserReady']),
+            'captchaConfigured' => !empty($stats['captchaConfigured']),
+        ];
+    }
+}

application/common/service/SplitRedirectService.php

@@ -72,16 +72,16 @@ class SplitRedirectService
             ? (string) ($picked['number_type_custom'] ?? '')
             : (string) $picked->getAttr('number_type_custom');
 
-        $whatsAppReplyText = '';
+        $replyText = '';
-        if ($numberType === 'whatsapp') {
+        if (in_array($numberType, ['whatsapp', 'telegram'], true)) {
-            $whatsAppReplyText = SplitAutoReplyService::pickRandomLine((string) $link->getAttr('auto_reply'));
+            $replyText = SplitAutoReplyService::pickRandomLine((string) $link->getAttr('auto_reply'));
         }
 
         $redirectUrl = SplitFriendUrlBuilder::build(
             $numberType,
             $numberValue,
             $numberCustom,
-            $whatsAppReplyText
+            $replyText
         );
         if ($redirectUrl === '') {
             return null;

application/common/service/SplitScrmSpiderFactory.php

@@ -6,9 +6,11 @@ namespace app\common\service;
 
 use app\common\library\scrm\ScrmSpiderInterface;
 use app\common\library\scrm\spider\A2cSpider;
+use app\common\library\scrm\spider\ChatknowSpider;
 use app\common\library\scrm\spider\HaiwangSpider;
 use app\common\library\scrm\spider\HuojianSpider;
 use app\common\library\scrm\spider\SsCustomerSpider;
+use app\common\library\scrm\spider\WhatshubSpider;
 use app\common\library\scrm\spider\XingheSpider;
 
 /**
@@ -25,6 +27,8 @@ class SplitScrmSpiderFactory
         'huojian'     => HuojianSpider::class,
         'xinghe'      => XingheSpider::class,
         'ss_customer' => SsCustomerSpider::class,
+        'chatknow'    => ChatknowSpider::class,
+        'whatshub'    => WhatshubSpider::class,
         // ceo_scrm 等未实现类型：新增 spider 类后在此注册
     ];
 
@@ -45,6 +49,16 @@ class SplitScrmSpiderFactory
         return self::resolveClass($ticketType) !== null;
     }
 
+    /**
+     * 已注册且已实现蜘蛛的类型列表
+     *
+     * @return list<string>
+     */
+    public static function listSupportedTypes(): array
+    {
+        return array_keys(self::MAP);
+    }
+
     /**
      * @return ScrmSpiderInterface|null
      */

application/common/service/SplitSyncConfigService.php

@@ -50,6 +50,42 @@ class SplitSyncConfigService
         return max(0, (int) $value);
     }
 
+    /**
+     * 单次 cron 最多处理几条到期工单，避免一分钟内打满 Node Browser 槽位
+     */
+    public static function getMaxTicketsPerCronRun(): int
+    {
+        $value = self::getConfigValue('split_sync_max_per_cron');
+        if ($value === '') {
+            return 2;
+        }
+        return max(1, min(20, (int) $value));
+    }
+
+    /**
+     * 全局 cron 锁过期秒数，防止异常退出后永久占锁
+     */
+    public static function getCronLockTtlSeconds(): int
+    {
+        $value = self::getConfigValue('split_sync_cron_lock_ttl');
+        if ($value === '') {
+            return 1800;
+        }
+        return max(300, (int) $value);
+    }
+
+    /**
+     * Node 排队数达到该阈值时，本轮 cron 不再提交新任务
+     */
+    public static function getNodeQueueSkipThreshold(): int
+    {
+        $value = self::getConfigValue('split_sync_node_queue_threshold');
+        if ($value === '') {
+            return 2;
+        }
+        return max(0, (int) $value);
+    }
+
     private static function getConfigValue(string $name): string
     {
         $site = Config::get('site.' . $name);

application/common/service/SplitTicketSyncService.php

@@ -30,9 +30,10 @@ class SplitTicketSyncService
     /**
      * 同步单条工单
      *
+     * @param bool $dueValidated 为 true 时跳过 shouldSkip（由 syncDueTickets 预筛后传入）
      * @return array{success:bool,message:string,skipped?:bool}
      */
-    public function syncOne(int $ticketId, bool $force = false): array
+    public function syncOne(int $ticketId, bool $force = false, bool $dueValidated = false): array
     {
         $ticket = Ticket::get($ticketId);
         if (!$ticket) {
@@ -50,7 +51,7 @@ class SplitTicketSyncService
             'nodeHost'      => SplitSyncConfigService::getNodeHost(),
         ]);
 
-        if (!$force) {
+        if (!$force && !$dueValidated) {
             $skip = $this->shouldSkip($ticket);
             if ($skip !== null) {
                 SplitTicketSyncLogger::log('sync', 'skipped', ['reason' => $skip]);
@@ -76,23 +77,47 @@ class SplitTicketSyncService
     }
 
     /**
-     * 扫描到期工单并同步
+     * 扫描到期工单并同步（限流 + Node 队列感知）
      */
     public function syncDueTickets(): int
     {
-        $count = 0;
+        $maxPerRun = SplitSyncConfigService::getMaxTicketsPerCronRun();
+        $autoSyncTypes = $this->resolveAutoSyncTicketTypes();
+        if ($autoSyncTypes === []) {
+            SplitTicketSyncLogger::log('cron', 'scan skip', ['reason' => 'no auto-sync ticket types']);
+            return 0;
+        }
+
+        if (!SplitNodeHealthService::canAcceptWork()) {
+            SplitTicketSyncLogger::log('cron', 'scan skip', [
+                'reason' => 'node queue busy',
+                'queue'  => SplitNodeHealthService::getQueueSnapshot(),
+            ]);
+            return 0;
+        }
+
         $failThreshold = SplitSyncConfigService::getFailPauseThreshold();
-        $query = Ticket::where('status', 'normal');
+        $query = Ticket::where('status', 'normal')->whereIn('ticket_type', $autoSyncTypes);
         if ($failThreshold > 0) {
             $query->where('sync_fail_count', '<', $failThreshold);
         }
-        $list = $query->select();
+        // 多取候选：间隔过滤在 PHP 完成，优先同步最久未更新的工单
+        $list = $query->order('sync_time', 'asc')->order('id', 'asc')
+            ->limit($maxPerRun * 5)
+            ->select();
 
         SplitTicketSyncLogger::log('cron', 'scan start', [
             'candidateCount' => count($list),
+            'maxPerRun'      => $maxPerRun,
+            'autoSyncTypes'  => $autoSyncTypes,
+            'nodeQueue'      => SplitNodeHealthService::getQueueSnapshot(),
         ]);
 
+        $count = 0;
         foreach ($list as $ticket) {
+            if ($count >= $maxPerRun) {
+                break;
+            }
             $skip = $this->shouldSkip($ticket);
             if ($skip !== null) {
                 SplitTicketSyncLogger::log('cron', 'candidate skipped', [
@@ -102,7 +127,14 @@ class SplitTicketSyncService
                 ]);
                 continue;
             }
-            $result = $this->syncOne((int) $ticket['id'], false);
+            if (!SplitNodeHealthService::canAcceptWork()) {
+                SplitTicketSyncLogger::log('cron', 'node busy, stop batch', [
+                    'processed' => $count,
+                    'queue'     => SplitNodeHealthService::getQueueSnapshot(),
+                ]);
+                break;
+            }
+            $result = $this->syncOne((int) $ticket['id'], false, true);
             if (!empty($result['skipped'])) {
                 continue;
             }
@@ -113,6 +145,22 @@ class SplitTicketSyncService
         return $count;
     }
 
+    /**
+     * 已配置自动同步周期且已实现蜘蛛的工单类型
+     *
+     * @return list<string>
+     */
+    private function resolveAutoSyncTicketTypes(): array
+    {
+        $types = [];
+        foreach (SplitScrmSpiderFactory::listSupportedTypes() as $ticketType) {
+            if (SplitSyncConfigService::getIntervalMinutes($ticketType) > 0) {
+                $types[] = $ticketType;
+            }
+        }
+        return $types;
+    }
+
     /**
      * @return array{success:bool,message:string}
      */

application/config.php

@@ -279,17 +279,17 @@ return [
     //FastAdmin配置
     'fastadmin'              => [
         //是否开启前台会员中心
-        'usercenter'            => true,
+        'usercenter'            => false,
         //会员注册验证码类型email/mobile/wechat/text/false
         'user_register_captcha' => 'text',
         //登录验证码
-        'login_captcha'         => true,
+        'login_captcha'         => false,
         //登录失败超过10次则1天后重试
         'login_failure_retry'   => true,
         //是否同一账号同一时间只能在一个地方登录
         'login_unique'          => false,
         //是否开启IP变动检测
-        'loginip_check'         => true,
+        'loginip_check'         => false,
         //登录页默认背景图
         'login_background'      => "",
         //是否启用多级菜单导航

application/extra/site.php

@@ -1,10 +1,10 @@
 <?php
 
 return array (
-  'name' => 'LINK-S 多功能打粉',
+  'name' => 'link管理系统',
   'beian' => '',
   'cdnurl' => '',
-  'version' => '1.0.1',
+  'version' => '1.0.14',
   'timezone' => 'Asia/Shanghai',
   'forbiddenip' => '',
   'languages' => 
@@ -42,18 +42,19 @@ return array (
     'category2' => 'Category2',
     'custom' => 'Custom',
   ),
-  'split_platform_domain' => 'links.test',
+  'split_platform_domain' => 'flowerbells.top',
   'split_scrm_node_host' => 'http://127.0.0.1:3001',
   'split_sync_interval_a2c' => '3',
   'split_sync_interval_haiwang' => '3',
   'split_sync_interval_huojian' => '3',
   'split_sync_interval_xinghe' => '3',
-  'split_sync_interval_ss_custome' => '3',
+  'split_sync_interval_ss_customer' => '3',
   'split_sync_interval_ceo_scrm' => '0',
   'split_sync_interval_taiji' => '0',
   'split_sync_interval_ss_channel' => '0',
   'split_sync_interval_yifafa' => '0',
-  'split_sync_interval_whatshub' => '0',
+  'split_sync_interval_whatshub' => '5',
   'split_sync_interval_sihai' => '0',
-  'split_sync_fail_pause_threshold' => '5',
+  'split_sync_fail_pause_threshold' => '6',
+  'split_sync_interval_chatknow' => '5',
 );

application/index/controller/Index.php

@@ -13,7 +13,8 @@ class Index extends Frontend
 
     public function index()
     {
-        return $this->view->fetch();
+        return 404;
+        // return $this->view->fetch();
     }
 
 }

patches/application/admin/command/Install/split_config_chatknow.sql

@@ -0,0 +1,6 @@
+-- Chatknow SCRM 工单云控自动同步周期（分钟，0=不自动同步）
+SET NAMES utf8mb4;
+
+INSERT INTO `fa_config` (`name`, `group`, `title`, `tip`, `type`, `visible`, `value`, `content`, `rule`, `extend`, `setting`)
+SELECT 'split_sync_interval_chatknow', 'split', 'Chatknow SCRM同步周期(分钟)', '0 表示不自动同步', 'number', '', '5', '', '', '', NULL
+FROM DUAL WHERE NOT EXISTS (SELECT 1 FROM `fa_config` WHERE `name` = 'split_sync_interval_chatknow' LIMIT 1);

patches/application/admin/command/Install/split_config_fix_ss_customer.sql

@@ -0,0 +1,14 @@
+-- 修复 SS 云控同步周期配置键名拼写错误：ss_custome -> ss_customer
+SET NAMES utf8mb4;
+
+UPDATE `fa_config`
+SET `name` = 'split_sync_interval_ss_customer'
+WHERE `name` = 'split_sync_interval_ss_custome'
+  AND NOT EXISTS (SELECT 1 FROM (SELECT `id` FROM `fa_config` WHERE `name` = 'split_sync_interval_ss_customer') AS `t`);
+
+UPDATE `fa_config` AS `correct`
+INNER JOIN `fa_config` AS `wrong` ON `wrong`.`name` = 'split_sync_interval_ss_custome'
+SET `correct`.`value` = `wrong`.`value`
+WHERE `correct`.`name` = 'split_sync_interval_ss_customer';
+
+DELETE FROM `fa_config` WHERE `name` = 'split_sync_interval_ss_custome';

patches/application/admin/command/Install/split_config_sync.sql

@@ -29,6 +29,10 @@ INSERT INTO `fa_config` (`name`, `group`, `title`, `tip`, `type`, `visible`, `va
 SELECT 'split_sync_interval_ss_customer', 'split', 'SS云控(Customer)同步周期(分钟)', '0 表示不自动同步', 'number', '', '5', '', '', '', NULL
 FROM DUAL WHERE NOT EXISTS (SELECT 1 FROM `fa_config` WHERE `name` = 'split_sync_interval_ss_customer' LIMIT 1);
 
+INSERT INTO `fa_config` (`name`, `group`, `title`, `tip`, `type`, `visible`, `value`, `content`, `rule`, `extend`, `setting`)
+SELECT 'split_sync_interval_chatknow', 'split', 'Chatknow SCRM同步周期(分钟)', '0 表示不自动同步', 'number', '', '5', '', '', '', NULL
+FROM DUAL WHERE NOT EXISTS (SELECT 1 FROM `fa_config` WHERE `name` = 'split_sync_interval_chatknow' LIMIT 1);
+
 INSERT INTO `fa_config` (`name`, `group`, `title`, `tip`, `type`, `visible`, `value`, `content`, `rule`, `extend`, `setting`)
 SELECT 'split_sync_interval_ceo_scrm', 'split', 'CEO SCRM同步周期(分钟)', '0 表示不自动同步（蜘蛛未实现）', 'number', '', '0', '', '', '', NULL
 FROM DUAL WHERE NOT EXISTS (SELECT 1 FROM `fa_config` WHERE `name` = 'split_sync_interval_ceo_scrm' LIMIT 1);
@@ -52,3 +56,28 @@ FROM DUAL WHERE NOT EXISTS (SELECT 1 FROM `fa_config` WHERE `name` = 'split_sync
 INSERT INTO `fa_config` (`name`, `group`, `title`, `tip`, `type`, `visible`, `value`, `content`, `rule`, `extend`, `setting`)
 SELECT 'split_sync_interval_sihai', 'split', '四海云控同步周期(分钟)', '0 表示不自动同步', 'number', '', '0', '', '', '', NULL
 FROM DUAL WHERE NOT EXISTS (SELECT 1 FROM `fa_config` WHERE `name` = 'split_sync_interval_sihai' LIMIT 1);
+
+INSERT INTO `fa_config` (`name`, `group`, `title`, `tip`, `type`, `visible`, `value`, `content`, `rule`, `extend`, `setting`)
+SELECT 'split_sync_max_per_cron', 'split', '单次定时同步上限', '每分钟 cron 最多处理几条到期工单，防止打满 Node Browser 槽位', 'number', '', '2', '', '', '', NULL
+FROM DUAL WHERE NOT EXISTS (SELECT 1 FROM `fa_config` WHERE `name` = 'split_sync_max_per_cron' LIMIT 1);
+
+INSERT INTO `fa_config` (`name`, `group`, `title`, `tip`, `type`, `visible`, `value`, `content`, `rule`, `extend`, `setting`)
+SELECT 'split_sync_cron_lock_ttl', 'split', '定时同步全局锁TTL(秒)', '异常退出后自动释放全局锁，避免后续 cron 永久跳过', 'number', '', '1800', '', '', '', NULL
+FROM DUAL WHERE NOT EXISTS (SELECT 1 FROM `fa_config` WHERE `name` = 'split_sync_cron_lock_ttl' LIMIT 1);
+
+INSERT INTO `fa_config` (`name`, `group`, `title`, `tip`, `type`, `visible`, `value`, `content`, `rule`, `extend`, `setting`)
+SELECT 'split_sync_node_queue_threshold', 'split', 'Node排队跳过阈值', '排队数达到该值时本轮 cron 不再提交新任务', 'number', '', '2', '', '', '', NULL
+FROM DUAL WHERE NOT EXISTS (SELECT 1 FROM `fa_config` WHERE `name` = 'split_sync_node_queue_threshold' LIMIT 1);
+
+-- 修复历史拼写错误：split_sync_interval_ss_custome -> split_sync_interval_ss_customer
+UPDATE `fa_config`
+SET `name` = 'split_sync_interval_ss_customer'
+WHERE `name` = 'split_sync_interval_ss_custome'
+  AND NOT EXISTS (SELECT 1 FROM (SELECT `id` FROM `fa_config` WHERE `name` = 'split_sync_interval_ss_customer') AS `t`);
+
+UPDATE `fa_config` AS `correct`
+INNER JOIN `fa_config` AS `wrong` ON `wrong`.`name` = 'split_sync_interval_ss_custome'
+SET `correct`.`value` = `wrong`.`value`
+WHERE `correct`.`name` = 'split_sync_interval_ss_customer';
+
+DELETE FROM `fa_config` WHERE `name` = 'split_sync_interval_ss_custome';

patches/application/admin/command/Install/split_number.sql

@@ -71,6 +71,13 @@ WHERE m.name = 'split.number' AND m.ismenu = 1
   AND NOT EXISTS (SELECT 1 FROM `fa_auth_rule` WHERE `name` = 'split.number/batchupdate' LIMIT 1)
 LIMIT 1;
 
+INSERT INTO `fa_auth_rule` (`type`, `pid`, `name`, `title`, `icon`, `condition`, `remark`, `ismenu`, `createtime`, `updatetime`, `weigh`, `status`)
+SELECT 'file', m.id, 'split.number/batchoperate', '批量操作号码', 'fa fa-circle-o', '', '', 0, UNIX_TIMESTAMP(), UNIX_TIMESTAMP(), 0, 'normal'
+FROM `fa_auth_rule` m
+WHERE m.name = 'split.number' AND m.ismenu = 1
+  AND NOT EXISTS (SELECT 1 FROM `fa_auth_rule` WHERE `name` = 'split.number/batchoperate' LIMIT 1)
+LIMIT 1;
+
 INSERT INTO `fa_auth_rule` (`type`, `pid`, `name`, `title`, `icon`, `condition`, `remark`, `ismenu`, `createtime`, `updatetime`, `weigh`, `status`)
 SELECT 'file', m.id, 'split.number/multi', '批量更新', 'fa fa-circle-o', '', '列表状态开关', 0, UNIX_TIMESTAMP(), UNIX_TIMESTAMP(), 0, 'normal'
 FROM `fa_auth_rule` m